Parameters |
Factory Lead Time |
1 Week |
Lifecycle Status |
ACTIVE (Last Updated: 7 months ago) |
Contact Plating |
Gold |
Mount |
Surface Mount |
Mounting Type |
Surface Mount |
Package / Case |
SC-74A, SOT-753 |
Number of Pins |
5 |
Operating Temperature |
-40°C~125°C |
Packaging |
Tape & Reel (TR) |
JESD-609 Code |
e4 |
Part Status |
Active |
Moisture Sensitivity Level (MSL) |
1 (Unlimited) |
Number of Terminations |
5 |
ECCN Code |
EAR99 |
Type |
General Purpose |
Subcategory |
Comparator |
Max Power Dissipation |
500mW |
Terminal Position |
DUAL |
Terminal Form |
GULL WING |
Number of Functions |
1 |
Supply Voltage |
2V |
Base Part Number |
TS3021 |
Pin Count |
5 |
Output Type |
Push-Pull |
Operating Supply Voltage |
3V |
Number of Elements |
1 |
Nominal Supply Current |
115μA |
Power Dissipation |
500mW |
Max Supply Current |
115μA |
Propagation Delay |
105 ns |
Quiescent Current |
90μA |
Response Time |
42 ns |
Common Mode Rejection Ratio |
79 dB |
Voltage - Supply, Single/Dual (±) |
1.8V~5V |
Input Offset Voltage (Vos) |
6mV |
Average Bias Current-Max (IIB) |
0.3μA |
Power Supply Rejection Ratio (PSRR) |
69dB |
Max Input Current |
160nA |
Input Bias Current |
160nA |
Current - Quiescent (Max) |
90μA |
Voltage - Input Offset (Max) |
6mV @ 5V |
Current - Input Bias (Max) |
0.16μA @ 5V |
CMRR, PSRR (Typ) |
79dB CMRR |
Natural Thermal Resistance |
250 °C/W |
Height |
1.3mm |
Length |
3mm |
Width |
1.75mm |
Radiation Hardening |
No |
REACH SVHC |
No SVHC |
RoHS Status |
ROHS3 Compliant |
Lead Free |
Lead Free |
TS3021ILT Overview
In order to make transportation easier, it is packaged in SC-74A, SOT-753 .There is a Push-Pull output type for this comparator.The part will be shipped by Tape & Reel (TR) .There are5 terminals on the comparator.The electrical component in this case belongs to the Comparator family.With a voltage of 2V supplied, the comparator is capable of performing a wide range of demanding tasks.In terms of type, this is a typical General Purpose comparator.In total, it contains 1 elements.The device is equipped with 5 pins.In general, mounting type Surface Mount is recommended.Ideally, the operating temperature should be set at -40°C~125°C in order to prevent malfunction.Electronic comparator has 5 pins.Search TS3021 to find more pin-to-pin solutions.As a result, this comparator displays a quiescent current of 90μA .The PCB or other board can be mounted using the Surface Mount on it.The nominal supply current of the device should be 115μA for normal use.If the current supply exceeds 115μA , the comparator might be damaged.You can input a maximum current of 160nA into this device.The operating supply voltage for normal operation should be 3V .
TS3021ILT Features
Push-Pull output capability
General Purpose IC
Employing 1 elements
Operates under -40°C~125°C
Quiescent Current: 90μA
TS3021ILT Applications
There are a lot of STMicroelectronics TS3021ILT linear comparators applications.
- Appliances
- Mobile Phones and Tablets
- Portable and Battery-Powered Systems
- Multivibrators and High-Voltage Digital Logic Gates
- Battery-Powered Electronics
- Handheld Instruments
- Portable Battery Monitoring
- Pulse, Squarewave, and Time Delay Generators
- Point of load regulators
- Lithium ion battery monitoring