TS3022ID
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 8 |
| Operating Temperature | -40°C~125°C |
| Packaging | Tube |
| JESD-609 Code | e4 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Type | General Purpose |
| Terminal Finish | NICKEL PALLADIUM GOLD |
| Subcategory | Comparator |
| Max Power Dissipation | 1W |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Supply Voltage | 2V |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | TS3022 |
| Pin Count | 8 |
| Output Type | Push-Pull |
| Operating Supply Voltage | 3V |
| Number of Elements | 2 |
| Nominal Supply Current | 115μA |
| Power Dissipation | 1W |
| Max Supply Current | 115μA |
| Propagation Delay | 105 ns |
| Quiescent Current | 90μA |
| Response Time | 42 ns |
| Common Mode Rejection Ratio | 79 dB |
| Voltage - Supply, Single/Dual (±) | 1.8V~5V |
| Input Offset Voltage (Vos) | 8mV |
| Average Bias Current-Max (IIB) | 0.3μA |
| Supply Voltage Limit-Max | 5.5V |
| Input Bias Current | 160nA |
| Current - Quiescent (Max) | 90μA |
| Voltage - Input Offset (Max) | 8mV @ 5V |
| Current - Input Bias (Max) | 0.16μA @ 5V |
| CMRR, PSRR (Typ) | 79dB CMRR |
| Height | 1.25mm |
| Length | 5mm |
| Width | 4mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
TS3022ID Overview
A convenient transport package is provided in 8-SOIC (0.154, 3.90mm Width) .A comparator with an output type of Push-Pull is being used.As a result, it is designed with Tube package.Electronic comparator is possible to find the 8 terminals of the comparator.Electronic comparator is a part of Comparator family.With a 2V voltage supply, the comparator can perform multiple demanding tasks.Electronic comparator can be classified as a General Purpose chip.This element consists of 2 elements in total.As a result, it contains 8 pins.The recommended mounting method is Surface Mount .In order to avoid malfunctions, the operating temperature should be set to -40°C~125°C .This comparator has 8 pins.Try search TS3022 to get more pin-to-pin solutions for your special needs.A quiescent current of 90μA is displayed by this comparator.There is a Surface Mount for mounting it on a PCB or other board.Normally, the nominal supply current should be 115μA .Current supply exceeding 115μA could cause disfunction of the compartator.A normal operation requires a voltage of 3V .
TS3022ID Features
Push-Pull output capability
General Purpose IC
Employing 2 elements
Operates under -40°C~125°C
Quiescent Current: 90μA
TS3022ID Applications
There are a lot of STMicroelectronics TS3022ID linear comparators applications.
- Self-diagnostics
- Handheld Instruments
- General-Purpose Portable Devices
- Point of load regulators
- Appliances
- Set Top Boxes
- Mobile Phones and Tablets
- High-Speed Differential Line Receiver
- Threshold Detectors
- Body Control Modules
