Parameters |
Factory Lead Time |
1 Week |
Mount |
Surface Mount |
Mounting Type |
Surface Mount |
Package / Case |
8-SOIC (0.154, 3.90mm Width) |
Number of Pins |
8 |
Operating Temperature |
-40°C~125°C |
Packaging |
Tape & Reel (TR) |
JESD-609 Code |
e4 |
Part Status |
Active |
Moisture Sensitivity Level (MSL) |
1 (Unlimited) |
Number of Terminations |
8 |
ECCN Code |
EAR99 |
Type |
General Purpose |
Terminal Finish |
Nickel/Palladium/Gold (Ni/Pd/Au) |
Subcategory |
Comparator |
Max Power Dissipation |
1W |
Terminal Position |
DUAL |
Terminal Form |
GULL WING |
Peak Reflow Temperature (Cel) |
260 |
Number of Functions |
2 |
Supply Voltage |
2V |
Time@Peak Reflow Temperature-Max (s) |
30 |
Base Part Number |
TS3022 |
Pin Count |
8 |
Output Type |
Push-Pull |
Operating Supply Voltage |
3V |
Number of Elements |
2 |
Nominal Supply Current |
230μA |
Power Dissipation |
1W |
Max Supply Current |
135μA |
Propagation Delay |
105 ns |
Quiescent Current |
90μA |
Turn On Delay Time |
33 ns |
Response Time |
42 ns |
Common Mode Rejection Ratio |
79 dB |
Voltage - Supply, Single/Dual (±) |
1.8V~5V |
Input Offset Voltage (Vos) |
8mV |
Average Bias Current-Max (IIB) |
0.3μA |
Power Supply Rejection Ratio (PSRR) |
79dB |
Supply Voltage Limit-Max |
5.5V |
Max Input Current |
160nA |
Input Bias Current |
160nA |
Current - Quiescent (Max) |
90μA |
Voltage - Input Offset (Max) |
8mV @ 5V |
Current - Input Bias (Max) |
0.16μA @ 5V |
CMRR, PSRR (Typ) |
79dB CMRR |
Natural Thermal Resistance |
125 °C/W |
Height |
1.25mm |
Length |
5mm |
Width |
4mm |
Radiation Hardening |
No |
REACH SVHC |
No SVHC |
RoHS Status |
ROHS3 Compliant |
Lead Free |
Lead Free |
TS3022IDT Overview
The product is packaged in 8-SOIC (0.154, 3.90mm Width) to facilitate transportation.The comparator has a type Push-Pull output.We ship the part through Tape & Reel (TR) .You can find 8 terminals of the comparator.The electrical component in this case belongs to the Comparator families.The comparator is capable of achieving many demanding tasks when supplied with 2V voltage.A comparator of this type is typically of type General Purpose .There are a total of 2 elements in it.Electronic comparator includes 8 pins.Electronic comparator is recommended to mount using type Surface Mount .As a precaution, it is recommended to set the operating temperature to -40°C~125°C to prevent malfunctions.The comparator is equipped with 8 pins.Search TS3022 to find more pin-to-pin solutions.In this comparator, the quiescent current is 90μA .The board has a Surface Mount for mounting on a PCB or any other board.Normal use of the device should require a nominal supply current of 230μA .An excess of current supply over 135μA could result in malfunction of the comparator.Input current to the device cannot exceed 160nA .Comparator electronics is necessary to have an operating supply voltage of 3V for normal operation.
TS3022IDT Features
Push-Pull output capability
General Purpose IC
Employing 2 elements
Operates under -40°C~125°C
Quiescent Current: 90μA
TS3022IDT Applications
There are a lot of STMicroelectronics TS3022IDT linear comparators applications.
- Industrial
- Power Supervision
- Factory automation & control
- Mobile Communications
- Body Control Modules
- Battery-Powered Electronics
- Limit Comparators
- Zero-Crossing Detectors
- Infotainment and Clusters
- Motor drives