TS321IDBVT
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 2 days ago) |
| Mounting Type | Surface Mount |
| Package / Case | SC-74A, SOT-753 |
| Surface Mount | YES |
| Number of Pins | 5 |
| Operating Temperature | -40°C~125°C |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 5 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Operational Amplifier |
| Packing Method | TR |
| Technology | BIPOLAR |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Base Part Number | TS321 |
| Pin Count | 5 |
| Operating Supply Voltage | 15V |
| Number of Channels | 1 |
| Operating Supply Current | 600μA |
| Nominal Supply Current | 800μA |
| Output Current | 40mA |
| Slew Rate | 0.4V/μs |
| Architecture | VOLTAGE-FEEDBACK |
| Amplifier Type | General Purpose |
| Common Mode Rejection Ratio | 65 dB |
| Current - Input Bias | 20nA |
| Voltage - Supply, Single/Dual (±) | 3V~30V ±1.5V~15V |
| Output Current per Channel | 40mA |
| Input Offset Voltage (Vos) | 4mV |
| Unity Gain BW-Nom | 800 kHz |
| Voltage Gain | 100dB |
| Average Bias Current-Max (IIB) | 0.2μA |
| Low-Offset | NO |
| Frequency Compensation | YES |
| Supply Voltage Limit-Max | 32V |
| Voltage - Input Offset | 500μV |
| Low-Bias | NO |
| Micropower | NO |
| Max Frequency | 100kHz |
| Programmable Power | NO |
| Nominal Gain Bandwidth Product | 800 kHz |
| Max I/O Voltage | 4mV |
| Wideband | NO |
| Power | NO |
| Input Offset Current-Max (IIO) | 0.0003μA |
| Height | 1.45mm |
| Length | 2.9mm |
| Width | 1.6mm |
| Thickness | 1.2mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TS321IDBVT Overview
In order to protect the op amps, a SC-74A, SOT-753 case is used. General Purpose-type instrumentation amplifiers are used in this application. Linear amplifier is delivered in a Tape & Reel (TR) case. The number of terminations approaches 5. The total number of pins on linear amplifier is 5. This linear amplifier should be powered by an 5V battery. It should be noted that this type of buffer amplifier is exactly what is known as a Operational Amplifier device. The op amp ic has an array of 5 pins on it. The input offset voltage is 4mV. For this electrical component, the recommended mounting type is Surface Mount, which is the most common. In terms of operating temperatures, this buffer amplifier works very well at a temperature of around -40°C~125°C . The buffer amplifier is capable of operating from a supply current of 600μA . The voltage gain should stay at 100dB. 1 channels are available on the instrumentation amplifier. The operating supply voltage of the buffer op amp is rated at 15V. It is used TR to pack the op amps.
TS321IDBVT Features
5 Pins
supply voltage of 5V
100dB voltage gain
TS321IDBVT Applications
There are a lot of Texas Instruments TS321IDBVT Instrumentational OP Amps applications.
- Car stereo
- Video data acquisition
- Band-stop filter
- Laptop
- Voltage regulation circuit
- Industrial applications including automation
- Automatic control
- Cinema or auditorium audio system
- Exponential operation circuits
- Active probe
