Parameters |
Factory Lead Time |
1 Week |
Mount |
Surface Mount |
Mounting Type |
Surface Mount |
Package / Case |
SC-74A, SOT-753 |
Number of Pins |
5 |
Operating Temperature |
-40°C~125°C |
Packaging |
Tape & Reel (TR) |
JESD-609 Code |
e4 |
Part Status |
Active |
Moisture Sensitivity Level (MSL) |
1 (Unlimited) |
Number of Terminations |
5 |
ECCN Code |
EAR99 |
Type |
General Purpose |
Terminal Finish |
Nickel/Palladium/Gold (Ni/Pd/Au) |
Subcategory |
Comparator |
Terminal Position |
DUAL |
Terminal Form |
GULL WING |
Number of Functions |
1 |
Supply Voltage |
1.8V |
Base Part Number |
TS331 |
Pin Count |
5 |
Output Type |
Open Drain |
Operating Supply Voltage |
3V |
Number of Elements |
1 |
Nominal Supply Current |
33μA |
Output Current |
93mA |
Max Supply Current |
33μA |
Propagation Delay |
720 ns |
Quiescent Current |
26μA |
Response Time |
420 ns |
Common Mode Rejection Ratio |
79 dB |
Voltage - Supply, Single/Dual (±) |
1.6V~5V |
Output Current per Channel |
93mA |
Input Offset Voltage (Vos) |
500μV |
Voltage Gain |
100dB |
Power Supply Rejection Ratio (PSRR) |
79dB |
Max Input Current |
40nA |
Input Bias Current |
30nA |
Current - Quiescent (Max) |
26μA |
Max Junction Temperature (Tj) |
150°C |
Voltage - Input Offset (Max) |
5mV @ 5V |
Current - Input Bias (Max) |
0.04μA @ 5V |
CMRR, PSRR (Typ) |
79dB CMRR |
Natural Thermal Resistance |
250 °C/W |
Current - Output (Typ) |
93mA @ 5V |
Height |
1.45mm |
Length |
2.9mm |
Radiation Hardening |
No |
REACH SVHC |
No SVHC |
RoHS Status |
ROHS3 Compliant |
Lead Free |
Lead Free |
TS331ILT Overview
To facilitate transportation, it comes packaged in SC-74A, SOT-753 .There is a Open Drain output type for this comparator.We ship the part through Tape & Reel (TR) .The device is designed with 5 terminations.The electrical component in this case belongs to the Comparator families.Electronic comparator is capable of performing numerous tasks when powered by 1.8V voltage.It's a typical General Purpose comparator.A total of 1 elements can be found in it.Electronic comparator has 5 pins.In general, mounting type Surface Mount is recommended.Electronic comparator is recommended that the operating temperature be set to -40°C~125°C to prevent malfunctions.5 pins are available on the comparator.If you require more pin-to-pin solutions, search TS331 for more options.There is a quiescent current of 26μA in this comparator.There is a Surface Mount on the board for mounting to a PCB or other board.Normal use of the device should require a nominal supply current of 33μA .An excess of current supply over 33μA could result in malfunction of the comparator.There is a maximum current that can be input into the device of 40nA .Based on the voltage formula, the voltage gain of the part is 100dB .Comparator electronics is necessary to have a voltage of 3V for normal operation.
TS331ILT Features
Open Drain output capability
General Purpose IC
Employing 1 elements
Operates under -40°C~125°C
Quiescent Current: 26μA
Voltage Gain: 100dB
TS331ILT Applications
There are a lot of STMicroelectronics TS331ILT linear comparators applications.
- Window Comparators
- System control and monitoring
- Point of load regulators
- Power Supervision
- Battery-Powered Electronics
- Analog front end
- Mobile Phones and Tablets
- Security Detection Systems
- Consumer Medical Electronics
- Laptop Computers