Parameters |
Factory Lead Time |
1 Week |
Lifecycle Status |
ACTIVE (Last Updated: 7 months ago) |
Mount |
Surface Mount |
Mounting Type |
Surface Mount |
Package / Case |
6-UFDFN |
Number of Pins |
6 |
Operating Temperature |
-40°C~125°C |
Packaging |
Cut Tape (CT) |
Part Status |
Active |
Moisture Sensitivity Level (MSL) |
1 (Unlimited) |
Number of Terminations |
6 |
ECCN Code |
EAR99 |
Type |
General Purpose |
Subcategory |
Comparator |
Terminal Position |
DUAL |
Number of Functions |
1 |
Supply Voltage |
1.8V |
Terminal Pitch |
0.4mm |
Base Part Number |
TS331 |
Output Type |
Open Drain |
Number of Elements |
1 |
Nominal Supply Current |
29μA |
Output Current |
93mA |
Max Supply Current |
29μA |
Propagation Delay |
720 ns |
Quiescent Current |
26μA |
Turn On Delay Time |
720 ns |
Response Time |
420 ns |
Common Mode Rejection Ratio |
79 dB |
Voltage - Supply, Single/Dual (±) |
1.6V~5V |
Input Offset Voltage (Vos) |
5mV |
Voltage Gain |
100dB |
Power Supply Rejection Ratio (PSRR) |
79dB |
Supply Voltage Limit-Max |
5.5V |
Max Input Current |
400nA |
Input Bias Current |
400nA |
Current - Quiescent (Max) |
26μA |
Voltage - Input Offset (Max) |
5mV @ 5V |
Current - Input Bias (Max) |
0.4μA @ 5V |
CMRR, PSRR (Typ) |
79dB CMRR |
Current - Output (Typ) |
93mA @ 5V |
Height Seated (Max) |
0.55mm |
Radiation Hardening |
No |
RoHS Status |
ROHS3 Compliant |
Lead Free |
Lead Free |
TS331IQT Overview
In order to make transportation easier, it is packaged in 6-UFDFN .There is a comparator of type Open Drain output on this device.The part is shipped by Cut Tape (CT) .As you can see, the comparator has6 terminals.The electrical component here belongs to the Comparator family.This comparator is capable of handling a wide range of tasks if it is supplied with a voltage of 1.8V .The type of the chip can be classified as General Purpose .A total of 1 elements can be found in it.In general, mounting type Surface Mount is recommended.Electronic comparator is recommended that you set the operating temperature to -40°C~125°C in order to prevent malfunctions.The comparator has 6 pins.Search TS331 to find more pin-to-pin solutions.There is a quiescent current of 26μA in this comparator.A Surface Mount is provided for mounting it onto a PCB or another board.Electronic comparator is recommended that the nominal supply current be 29μA in order to use the device normally.The compartator could be damaged if the current supply exceeds 29μA .Input current to the device is limited to 400nA .The voltage gain of the part is indicated by 100dB in the voltage formula.
TS331IQT Features
Open Drain output capability
General Purpose IC
Employing 1 elements
Operates under -40°C~125°C
Quiescent Current: 26μA
Voltage Gain: 100dB
TS331IQT Applications
There are a lot of STMicroelectronics TS331IQT linear comparators applications.
- Wearable Devices
- Consumer Medical Electronics
- Simple Analog-to-Digital Converters (ADCs)
- Window Comparators, Multivibrators
- Alarm and Monitoring Circuits
- Infotainment and Clusters
- Pulse, Squarewave, and Time Delay Generators
- Battery-Powered Electronics
- General-Purpose Portable Devices
- Power management