Parameters |
Factory Lead Time |
1 Week |
Lifecycle Status |
ACTIVE (Last Updated: 7 months ago) |
Mount |
Surface Mount |
Mounting Type |
Surface Mount |
Package / Case |
8-SOIC (0.154, 3.90mm Width) |
Number of Pins |
8 |
Weight |
506.605978mg |
Operating Temperature |
-40°C~125°C |
Packaging |
Tape & Reel (TR) |
JESD-609 Code |
e4 |
Part Status |
Active |
Moisture Sensitivity Level (MSL) |
1 (Unlimited) |
Number of Terminations |
8 |
ECCN Code |
EAR99 |
Type |
General Purpose |
Terminal Finish |
Nickel/Palladium/Gold (Ni/Pd/Au) |
Subcategory |
Comparator |
Terminal Position |
DUAL |
Terminal Form |
GULL WING |
Peak Reflow Temperature (Cel) |
260 |
Number of Functions |
2 |
Supply Voltage |
1.8V |
Time@Peak Reflow Temperature-Max (s) |
30 |
Base Part Number |
TS332 |
Pin Count |
8 |
Output Type |
Open Drain |
Operating Supply Voltage |
3V |
Number of Elements |
2 |
Operating Supply Current |
26μA |
Output Current |
93mA |
Propagation Delay |
720 ns |
Quiescent Current |
26μA |
Response Time |
420 ns |
Common Mode Rejection Ratio |
79 dB |
Voltage - Supply, Single/Dual (±) |
1.6V~5V |
Input Offset Voltage (Vos) |
5mV |
Voltage Gain |
100dB |
Average Bias Current-Max (IIB) |
0.1μA |
Power Supply Rejection Ratio (PSRR) |
79dB |
Supply Voltage Limit-Max |
5.5V |
Max Input Current |
40nA |
Input Bias Current |
40nA |
Voltage - Input Offset (Max) |
5mV @ 5V |
Current - Input Bias (Max) |
0.04μA @ 5V |
CMRR, PSRR (Typ) |
79dB CMRR |
Current - Output (Typ) |
93mA @ 5V |
Height Seated (Max) |
1.75mm |
Length |
4.9mm |
Width |
3.9mm |
Radiation Hardening |
No |
RoHS Status |
ROHS3 Compliant |
Lead Free |
Lead Free |
TS332IDT Overview
The product is packaged in 8-SOIC (0.154, 3.90mm Width) to facilitate transportation.A comparator with a Open Drain output is used here.As a result, it is designed with Tape & Reel (TR) package.There are8 terminals on the comparator.The chip belongs to Comparator .Electronic comparator is capable of performing numerous tasks when powered by 1.8V voltage.A comparator of this type is typically of type General Purpose .A total of 2 elements can be found in it.The device is equipped with 8 pins.Electronic comparator is recommended that the mounting type be Surface Mount .Electronic comparator is recommended that the operating temperature be set to -40°C~125°C in order to prevent malfunctions.This comparator has 8 pins.You can find more pin-to-pin solutions for your special requirements by searching TS332 .A quiescent current of 26μA is observed in this comparator.Electronic comparator has a Surface Mount for mounting on PCB or other boards.Electronic comparator is possible to input up to 40nA current into the device.The voltage gain of the part is indicated by 100dB in the voltage formula.Comparator electronics is necessary to have a voltage of 3V for normal operation.
TS332IDT Features
Open Drain output capability
General Purpose IC
Employing 2 elements
Operates under -40°C~125°C
Quiescent Current: 26μA
Voltage Gain: 100dB
TS332IDT Applications
There are a lot of STMicroelectronics TS332IDT linear comparators applications.
- Simple Analog-to-Digital Converters (ADCs)
- Current and voltage sensing
- Portable Battery Monitoring
- Metering Systems
- Window Comparators
- Threshold Detectors
- Mobile Phones and Tablets
- Multivibrators and High-Voltage Digital Logic Gates
- Battery-Powered Electronics
- Zero-Crossing Detectors