TS332IQ2T
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 7 months ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-UFDFN Exposed Pad |
| Number of Pins | 8 |
| Operating Temperature | -40°C~125°C |
| Packaging | Tape & Reel (TR) |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Type | General Purpose |
| Subcategory | Comparator |
| Terminal Position | DUAL |
| Terminal Form | NO LEAD |
| Peak Reflow Temperature (Cel) | NOT SPECIFIED |
| Number of Functions | 2 |
| Supply Voltage | 1.8V |
| Terminal Pitch | 0.5mm |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | TS332 |
| Pin Count | 8 |
| Output Type | Open Drain |
| Number of Elements | 2 |
| Output Current | 93mA |
| Propagation Delay | 720 ns |
| Quiescent Current | 30μA |
| Response Time | 420 ns |
| Common Mode Rejection Ratio | 79 dB |
| Voltage - Supply, Single/Dual (±) | 1.6V~5V |
| Input Offset Voltage (Vos) | 5mV |
| Voltage Gain | 100dB |
| Average Bias Current-Max (IIB) | 0.1μA |
| Power Supply Rejection Ratio (PSRR) | 79dB |
| Supply Voltage Limit-Max | 5.5V |
| Max Input Current | 40nA |
| Input Bias Current | 40nA |
| Current - Quiescent (Max) | 30μA |
| Voltage - Input Offset (Max) | 5mV @ 5V |
| Current - Input Bias (Max) | 0.04μA @ 5V |
| CMRR, PSRR (Typ) | 79dB CMRR |
| Current - Output (Typ) | 93mA @ 5V |
| Height | 550μm |
| Length | 2.15mm |
| Width | 2.15mm |
| RoHS Status | ROHS3 Compliant |
TS332IQ2T Overview
To facilitate transportation, it comes packaged in 8-UFDFN Exposed Pad .There is a comparator of type Open Drain output on this device.This device is designed in Tape & Reel (TR) case.There are 8 terminals on the comparator.The electrical component in this case belongs to the Comparator family.The comparator is capable of achieving many demanding tasks when supplied with 1.8V voltage.Speaking of types, this is a typical General Purpose comparator.A total of 2 elements can be found in it.A total of 8 pins are included.The recommended mounting type is Surface Mount .The operating temperature should be set to -40°C~125°C to avoid mal-function.This comparator has 8 pins.Search TS332 to find more pin-to-pin solutions.A quiescent current of 30μA is displayed by this comparator.A Surface Mount is provided for mounting it onto a PCB or another board.Electronic comparator is possible to input a maximum current of 40nA into the device.Based on the voltage formula, the voltage gain of the part is 100dB .
TS332IQ2T Features
Open Drain output capability
General Purpose IC
Employing 2 elements
Operates under -40°C~125°C
Quiescent Current: 30μA
Voltage Gain: 100dB
TS332IQ2T Applications
There are a lot of STMicroelectronics TS332IQ2T linear comparators applications.
- High-Speed Differential Line Receiver
- Mobile Communications
- Power Supervision
- Wide Range VCO; MOS Clock Timers
- RC Timers
- Motor drives
- Power management
- Ultra-Low Power Systems
- Battery management and protection
- Infotainment and Clusters
