TS332IST
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 7 months ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) |
| Number of Pins | 8 |
| Operating Temperature | -40°C~125°C |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e3 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Type | General Purpose |
| Terminal Finish | Matte Tin (Sn) - annealed |
| Subcategory | Comparator |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Supply Voltage | 1.8V |
| Terminal Pitch | 0.65mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | TS332 |
| Pin Count | 8 |
| Output Type | Open Drain |
| Operating Supply Voltage | 3V |
| Number of Elements | 2 |
| Operating Supply Current | 26μA |
| Output Current | 93mA |
| Propagation Delay | 720 ns |
| Quiescent Current | 26μA |
| Response Time | 420 ns |
| Common Mode Rejection Ratio | 79 dB |
| Voltage - Supply, Single/Dual (±) | 1.6V~5V |
| Input Offset Voltage (Vos) | 5mV |
| Voltage Gain | 100dB |
| Average Bias Current-Max (IIB) | 0.1μA |
| Power Supply Rejection Ratio (PSRR) | 79dB |
| Supply Voltage Limit-Max | 5.5V |
| Max Input Current | 40nA |
| Input Bias Current | 40nA |
| Voltage - Input Offset (Max) | 5mV @ 5V |
| Current - Input Bias (Max) | 0.04μA @ 5V |
| CMRR, PSRR (Typ) | 79dB CMRR |
| Natural Thermal Resistance | 190 °C/W |
| Current - Output (Typ) | 93mA @ 5V |
| Height Seated (Max) | 1.1mm |
| Length | 3mm |
| Width | 3mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TS332IST Overview
A convenient transport package is provided in 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) .This comparator is of the Open Drain output type.Electronic comparator is shipped by Tape & Reel (TR) .Electronic comparator is possible to find the 8 terminals of the comparator.The electrical component here belongs to the Comparator family.This comparator is capable of handling a wide range of tasks if it is supplied with a voltage of 1.8V .It's a typical General Purpose comparator.There are a total of 2 elements in it.The device is equipped with 8 pins.Electronic comparator is recommended to mount the device using type Surface Mount .As a precaution, it is recommended to set the operating temperature to -40°C~125°C to prevent malfunctions.8 pins are present on the comparator.You can find more pin-to-pin solutions for your special requirements by searching TS332 .There is a quiescent current of 26μA in this comparator.There is a Surface Mount on the board for mounting to a PCB or other board.Input current to the device is limited to 40nA .In accordance with the voltage formula, the part's voltage gain is 100dB .For normal operation, there should be 3V operating supply voltage applied.
TS332IST Features
Open Drain output capability
General Purpose IC
Employing 2 elements
Operates under -40°C~125°C
Quiescent Current: 26μA
Voltage Gain: 100dB
TS332IST Applications
There are a lot of STMicroelectronics TS332IST linear comparators applications.
- Ultra-Low Power Systems
- Building automation
- Window Comparators
- Wide Range VCO; MOS Clock Timers
- Notebooks and PDAs
- Laptop Computers
- General Purpose Low Voltage Applications
- Security Detection Systems
- Mobile Phones and Tablets
- Portable and Battery-Powered Systems
