TS332IYDT
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 7 months ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 8 |
| Operating Temperature | -40°C~125°C |
| Packaging | Cut Tape (CT) |
| Series | Automotive, AEC-Q100 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Type | General Purpose |
| Subcategory | Comparator |
| Packing Method | TAPE AND REEL |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Number of Functions | 2 |
| Supply Voltage | 1.8V |
| Base Part Number | TS332 |
| Output Type | Open Drain |
| Number of Elements | 2 |
| Nominal Supply Current | 22μA |
| Max Supply Current | 22μA |
| Propagation Delay | 210 ns |
| Response Time | 420 ns |
| Common Mode Rejection Ratio | 79 dB |
| Voltage - Supply, Single/Dual (±) | 1.6V~5V |
| Output Current per Channel | 22mA |
| Input Offset Voltage (Vos) | 6mV |
| Voltage Gain | 100dB |
| Average Bias Current-Max (IIB) | 0.1μA |
| Supply Voltage Limit-Max | 5.5V |
| Input Bias Current | 100nA |
| Current - Quiescent (Max) | 26μA |
| Voltage - Input Offset (Max) | 5mV @ 5V |
| Current - Input Bias (Max) | 0.04μA @ 5V |
| CMRR, PSRR (Typ) | 79dB CMRR |
| Current - Output (Typ) | 93mA @ 5V |
| Propagation Delay (Max) | 720ns |
| Height | 1.25mm |
| Length | 5mm |
| Width | 4mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TS332IYDT Overview
For convenience, it is packaged in 8-SOIC (0.154, 3.90mm Width) .The comparator has an output type of Open Drain .The part is shipped by Cut Tape (CT) .Electronic comparator is possible to find the 8 terminals of the comparator.The electrical component in this case belongs to the Comparator family.When supplied with 1.8V voltage, the comparator is capable of performing a wide range of tasks.When it comes to types, this comparator is a typical General Purpose .Electronic comparator has a total of 2 elements.The type of mounting recommended is Surface Mount .To ensure proper functioning, the operating temperature should be set to -40°C~125°C .8 pins are present on the comparator.If you require more pin-to-pin solutions, search TS332 for more options.There is a Surface Mount on the board for mounting to a PCB or other board.For normal use of the device, the nominal supply current should be 22μA .The compartator could be damaged if the current supply exceeds 22μA .Based on the voltage formula, the voltage gain of the part is 100dB .The part is based on Automotive, AEC-Q100 .The device is packaged in TAPE AND REEL and is often used in ADC circuits.
TS332IYDT Features
Open Drain output capability
General Purpose IC
Employing 2 elements
Operates under -40°C~125°C
Voltage Gain: 100dB
TS332IYDT Applications
There are a lot of STMicroelectronics TS332IYDT linear comparators applications.
- Appliances
- Infotainment and Clusters
- Mobile Phones and Tablets
- Point of load regulators
- Wearable Devices
- Threshold Detectors
- Zero-Crossing Detectors
- Wide Range VCO; MOS Clock Timers
- High-Speed Sampling Circuits
- Battery management and protection
