TS334IPT
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 7 months ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 14-TSSOP (0.173, 4.40mm Width) |
| Number of Pins | 14 |
| Weight | 140.30179mg |
| Operating Temperature | -40°C~125°C |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 14 |
| ECCN Code | EAR99 |
| Type | General Purpose |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Comparator |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 4 |
| Supply Voltage | 1.8V |
| Terminal Pitch | 0.65mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | TS334 |
| Pin Count | 14 |
| Output Type | Open Drain |
| Operating Supply Voltage | 3V |
| Number of Elements | 4 |
| Power Supplies | 1.8/5V |
| Operating Supply Current | 26μA |
| Output Current | 93mA |
| Propagation Delay | 210 ns |
| Quiescent Current | 26μA |
| Supply Current-Max | 0.038mA |
| Response Time | 420 ns |
| Common Mode Rejection Ratio | 79 dB |
| Voltage - Supply, Single/Dual (±) | 1.6V~5V |
| Input Offset Voltage (Vos) | 5mV |
| Voltage Gain | 100dB |
| Average Bias Current-Max (IIB) | 0.1μA |
| Power Supply Rejection Ratio (PSRR) | 79dB |
| Supply Voltage Limit-Max | 5.5V |
| Max Input Current | 40nA |
| Input Bias Current | 40nA |
| Voltage - Input Offset (Max) | 5mV @ 5V |
| Current - Input Bias (Max) | 0.04μA @ 5V |
| CMRR, PSRR (Typ) | 79dB CMRR |
| Natural Thermal Resistance | 100 °C/W |
| Current - Output (Typ) | 93mA @ 5V |
| Height Seated (Max) | 1.2mm |
| Length | 5mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TS334IPT Overview
To facilitate transportation, it comes packaged in 14-TSSOP (0.173, 4.40mm Width) .The comparator has a Open Drain output.This package has been designed with Tape & Reel (TR) .Electronic comparator is possible to find the 14 terminals of the comparator.Other Comparator like the device play a important role in the industry.This comparator is capable of handling a wide range of tasks if it is supplied with a voltage of 1.8V .In general, the chip type can be classified as General Purpose .Electronic comparator consists of 4 elements in total.A total of 14 pins are included.A Surface Mount mounting type is recommended.If you want to avoid malfunction, you should set the operating temperature to -40°C~125°C .The comparator has a pin count of 14 .Alternatively, you may search for TS334 to find more pin-to-pin solutions for your specific needs.As a result, this comparator displays a quiescent current of 26μA .This component has a Surface Mount mount for mounting to PCBs or other boards.A power supply of 1.8/5V is sufficient for the operation of the device.Electronic comparator is possible to input a maximum current of 40nA into the device.Comparator electronics is apparent from the voltage formula that the voltage gain for the part is 100dB .The part can be powered at a minimum current of 0.038mA .For normal operation, there should be 3V operating supply voltage applied.
TS334IPT Features
Open Drain output capability
General Purpose IC
Employing 4 elements
Operates under -40°C~125°C
Quiescent Current: 26μA
Voltage Gain: 100dB
TS334IPT Applications
There are a lot of STMicroelectronics TS334IPT linear comparators applications.
- High-Speed Differential Line Receiver
- Power Supervision
- Automatic Test Equipment
- Self-diagnostics
- Current and voltage sensing
- Metering Systems
- Mobile Phones
- Building automation
- Battery-Powered Electronics
- Battery management and protection
