TS339CPT
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 7 months ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 14-TSSOP (0.173, 4.40mm Width) |
| Number of Pins | 14 |
| Operating Temperature | 0°C~70°C |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 14 |
| ECCN Code | EAR99 |
| Type | General Purpose |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Comparator |
| Max Power Dissipation | 710mW |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Number of Functions | 4 |
| Supply Voltage | 3V |
| Terminal Pitch | 0.65mm |
| Base Part Number | TS339 |
| Pin Count | 14 |
| Output Type | CMOS, Open-Drain |
| Number of Elements | 4 |
| Power Supplies | 5V |
| Nominal Supply Current | 20μA |
| Power Dissipation | 710mW |
| Output Current | 20mA |
| Max Supply Current | 20μA |
| Quiescent Current | 25μA |
| Response Time | 1.5 μs |
| Common Mode Rejection Ratio | 75 dB |
| Voltage - Supply, Single/Dual (±) | 2.7V~16V ±1.35V~8V |
| Output Current per Channel | 2nA |
| Input Offset Voltage (Vos) | 5mV |
| Average Bias Current-Max (IIB) | 0.0006μA |
| Power Supply Rejection Ratio (PSRR) | 75dB |
| Supply Voltage Limit-Max | 18V |
| Max Input Current | 1pA |
| Input Bias Current | 600pA |
| Voltage - Input Offset (Max) | 5mV @ 10V |
| Current - Input Bias (Max) | 1pA @ 5V |
| CMRR, PSRR (Typ) | 75dB CMRR |
| Natural Thermal Resistance | 175 °C/W |
| Height | 1.05mm |
| Length | 5.1mm |
| Width | 4.48mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TS339CPT Overview
A convenient packaging is provided in the form of 14-TSSOP (0.173, 4.40mm Width) .This comparator is of the CMOS, Open-Drain output type.Electronic comparator is shipped by Tape & Reel (TR) .There are 14 terminals on the comparator.Electronic comparator is a part of Comparator family.With a voltage of 3V supplied, the comparator is capable of performing a wide range of demanding tasks.In general, the chip type can be classified as General Purpose .In total, it contains 4 elements.The device contains 14 pins.In general, mounting type Surface Mount is recommended.Ideally, the operating temperature should be set at 0°C~70°C in order to prevent malfunction.14 pins are present on the comparator.In case you are looking for more pin-to-pin solutions, you may want to search TS339 .A quiescent current of 25μA is displayed by this comparator.A Surface Mount is provided for mounting it onto a PCB or another board.Normal operation of the device requires a nominal supply current of 20μA .A current supply greater than 20μA may cause the comparator to malfunction.5V power supplies are enough to run the device.There is a maximum current that can be input into the device of 1pA .
TS339CPT Features
CMOS, Open-Drain output capability
General Purpose IC
Employing 4 elements
Operates under 0°C~70°C
Quiescent Current: 25μA
TS339CPT Applications
There are a lot of STMicroelectronics TS339CPT linear comparators applications.
- Simple Analog-to-Digital Converters (ADCs)
- Appliances
- Point of load regulators
- Pulse, Squarewave, and Time Delay Generators
- Self-diagnostics
- Limit Comparators
- System control and monitoring
- Automatic Test Equipment
- General-Purpose Portable Devices
- Mobile Phones and Tablets
