Parameters |
Factory Lead Time |
1 Week |
Lifecycle Status |
ACTIVE (Last Updated: 7 months ago) |
Contact Plating |
Tin |
Mount |
Surface Mount |
Mounting Type |
Surface Mount |
Package / Case |
14-SOIC (0.154, 3.90mm Width) |
Number of Pins |
14 |
Operating Temperature |
-40°C~125°C |
Packaging |
Cut Tape (CT) |
JESD-609 Code |
e4 |
Part Status |
Active |
Moisture Sensitivity Level (MSL) |
1 (Unlimited) |
Number of Terminations |
14 |
ECCN Code |
EAR99 |
Type |
General Purpose |
Terminal Finish |
Nickel/Palladium/Gold (Ni/Pd/Au) |
Subcategory |
Comparator |
Max Power Dissipation |
830mW |
Terminal Position |
DUAL |
Terminal Form |
GULL WING |
Peak Reflow Temperature (Cel) |
260 |
Number of Functions |
4 |
Supply Voltage |
3V |
Terminal Pitch |
1.27mm |
Time@Peak Reflow Temperature-Max (s) |
30 |
Base Part Number |
TS339 |
Pin Count |
14 |
Output Type |
CMOS, Open-Drain |
Number of Elements |
4 |
Power Supplies |
5V |
Nominal Supply Current |
80μA |
Power Dissipation |
830mW |
Output Current |
20mA |
Max Supply Current |
20μA |
Propagation Delay |
2.5 μs |
Quiescent Current |
25μA |
Turn On Delay Time |
2.5 μs |
Response Time |
1.5 μs |
Common Mode Rejection Ratio |
75 dB |
Voltage - Supply, Single/Dual (±) |
2.7V~16V ±1.35V~8V |
Output Current per Channel |
2nA |
Input Offset Voltage (Vos) |
5mV |
Average Bias Current-Max (IIB) |
0.0006μA |
Power Supply Rejection Ratio (PSRR) |
85dB |
Supply Voltage Limit-Max |
18V |
Max Input Current |
1pA |
Input Bias Current |
600pA |
Voltage - Input Offset (Max) |
5mV @ 10V |
Current - Input Bias (Max) |
1pA @ 5V |
CMRR, PSRR (Typ) |
75dB CMRR |
Height Seated (Max) |
1.75mm |
Length |
8.65mm |
Width |
3.9mm |
Radiation Hardening |
No |
RoHS Status |
ROHS3 Compliant |
Lead Free |
Lead Free |
TS339IDT Overview
To facilitate transportation, it comes packaged in 14-SOIC (0.154, 3.90mm Width) .There is a comparator of type CMOS, Open-Drain output on this device.The part will be shipped by Cut Tape (CT) .There are 14 terminals on the comparator.The component belongs to the Comparator family of electrical components.Supplied by 3V voltage, the comparator can accomplish the many demanding tasks.When it comes to types, this comparator is a typical General Purpose .Electronic comparator consists of 4 elements in total.There are 14 pins on this board.Surface Mount universial mout for easy adapting.In order to avoid malfunctions, the operating temperature should be set to -40°C~125°C .There are 14 pins on the comparator.If you require more pin-to-pin solutions, search TS339 for more options.This comparator presents a quiescent current of 25μA .Electronic comparator has a Surface Mount for mounting on PCB or other boards.Electronic comparator is recommended that the nominal supply current be 80μA in order to use the device normally.An excess of current supply over 20μA could result in malfunction of the comparator.The device can be powered by 5V power supplies.There is a maximum current that can be input into the device of 1pA .
TS339IDT Features
CMOS, Open-Drain output capability
General Purpose IC
Employing 4 elements
Operates under -40°C~125°C
Quiescent Current: 25μA
TS339IDT Applications
There are a lot of STMicroelectronics TS339IDT linear comparators applications.
- Handheld Instruments
- Wide Range VCO; MOS Clock Timers
- Zero-Crossing Detectors
- Notebooks and PDAs
- Wearable Devices
- High-Speed Differential Line Receiver
- Building automation
- Security Detection Systems
- General-Purpose Portable Devices
- Ultra-Low Power Systems