Parameters |
Factory Lead Time |
1 Week |
Lifecycle Status |
ACTIVE (Last Updated: 7 months ago) |
Mount |
Surface Mount |
Mounting Type |
Surface Mount |
Package / Case |
14-TSSOP (0.173, 4.40mm Width) |
Number of Pins |
14 |
Operating Temperature |
-40°C~125°C |
Packaging |
Cut Tape (CT) |
JESD-609 Code |
e4 |
Part Status |
Active |
Moisture Sensitivity Level (MSL) |
1 (Unlimited) |
Number of Terminations |
14 |
ECCN Code |
EAR99 |
Type |
General Purpose |
Terminal Finish |
Nickel/Palladium/Gold (Ni/Pd/Au) |
Subcategory |
Comparator |
Max Power Dissipation |
710mW |
Terminal Position |
DUAL |
Terminal Form |
GULL WING |
Number of Functions |
4 |
Supply Voltage |
3V |
Terminal Pitch |
0.65mm |
Base Part Number |
TS339 |
Pin Count |
14 |
Output Type |
CMOS, Open-Drain |
Number of Elements |
4 |
Power Supplies |
5V |
Nominal Supply Current |
80μA |
Power Dissipation |
710mW |
Output Current |
20mA |
Max Supply Current |
20μA |
Quiescent Current |
25μA |
Response Time |
1.5 μs |
Common Mode Rejection Ratio |
75 dB |
Voltage - Supply, Single/Dual (±) |
2.7V~16V ±1.35V~8V |
Output Current per Channel |
2nA |
Input Offset Voltage (Vos) |
5mV |
Average Bias Current-Max (IIB) |
0.0006μA |
Power Supply Rejection Ratio (PSRR) |
85dB |
Supply Voltage Limit-Max |
18V |
Max Input Current |
1pA |
Input Bias Current |
1pA |
Voltage - Input Offset (Max) |
5mV @ 10V |
Current - Input Bias (Max) |
1pA @ 5V |
CMRR, PSRR (Typ) |
75dB CMRR |
Height Seated (Max) |
1.2mm |
Length |
5mm |
Radiation Hardening |
No |
RoHS Status |
ROHS3 Compliant |
Lead Free |
Lead Free |
TS339IPT Overview
For convenience, it is packaged in 14-TSSOP (0.173, 4.40mm Width) .A comparator with an output type of CMOS, Open-Drain is being used.Ready for shipping in Cut Tape (CT) package.The comparator has 14 terminals.The component belongs to the Comparator family of electrical components.When supplied with 3V voltage, the comparator is capable of performing a wide range of tasks.In terms of type, this is a typical General Purpose comparator.The total number of elements is 4 .The board includes 14 pins.Electronic comparator is recommended to mount using type Surface Mount .Electronic comparator is recommended that the operating temperature be set to -40°C~125°C to prevent malfunctions.The comparator has a pin count of 14 .In order to find a solution that meets your specific needs, search TS339 for more pin-to-pin solutions.In this comparator, the quiescent current is 25μA .A Surface Mount is provided for mounting it onto a PCB or another board.Normal operation of the device requires 80μA supply current.Electronic comparator is possible for the comparator to malfunction if the current supply exceeds 20μA .There is sufficient power to run the device from 5V power supplies.Electronic comparator is possible to input up to 1pA current into the device.
TS339IPT Features
CMOS, Open-Drain output capability
General Purpose IC
Employing 4 elements
Operates under -40°C~125°C
Quiescent Current: 25μA
TS339IPT Applications
There are a lot of STMicroelectronics TS339IPT linear comparators applications.
- System control and monitoring
- Simple Analog-to-Digital Converters (ADCs)
- Point of load regulators
- Zero-Crossing Detectors
- Window Comparators
- Multivibrators and High-Voltage Digital Logic Gates
- Zero-Crossing Detectors
- Window Comparators, Multivibrators
- Motor drives
- General-Purpose Portable Devices