TS339IYDT
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 14-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 14 |
| Operating Temperature | -40°C~125°C |
| Packaging | Tape & Reel (TR) |
| Series | Automotive, AEC-Q100 |
| JESD-609 Code | e3 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 14 |
| ECCN Code | EAR99 |
| Type | General Purpose |
| Terminal Finish | Tin (Sn) |
| Subcategory | Comparator |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 4 |
| Supply Voltage | 3V |
| Terminal Pitch | 1.27mm |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | TS339 |
| Pin Count | 14 |
| Qualification Status | Not Qualified |
| Output Type | CMOS, Open-Drain |
| Number of Elements | 4 |
| Power Supplies | 3/5V |
| Output Current | 20mA |
| Quiescent Current | 25μA |
| Supply Current-Max | 0.025mA |
| Response Time | 1500 ns |
| Common Mode Rejection Ratio | 75 dB |
| Voltage - Supply, Single/Dual (±) | 2.7V~16V ±1.35V~8V |
| Input Offset Voltage (Vos) | 5mV |
| Average Bias Current-Max (IIB) | 0.0006μA |
| Power Supply Rejection Ratio (PSRR) | 75dB |
| Supply Voltage Limit-Max | 18V |
| Max Input Current | 1pA |
| Input Bias Current | 1pA |
| Voltage - Input Offset (Max) | 5mV @ 10V |
| Current - Input Bias (Max) | 1pA @ 5V |
| CMRR, PSRR (Typ) | 75dB CMRR |
| Height Seated (Max) | 1.75mm |
| Length | 8.65mm |
| Width | 3.9mm |
| RoHS Status | ROHS3 Compliant |
TS339IYDT Overview
For convenience, it is packaged in 14-SOIC (0.154, 3.90mm Width) .Output type CMOS, Open-Drain is used for this comparator.We ship the part through Tape & Reel (TR) .The comparator has 14 terminals.Other Comparator like the device play a important role in the industry.Supplied by 3V voltage, the comparator can accomplish the many demanding tasks.Electronic comparator can be classified as a General Purpose chip.In total, it contains 4 elements.There are 14 pins on this board.Surface Mount universial mout for easy adapting.Electronic comparator is recommended that the operating temperature be set to -40°C~125°C in order to prevent malfunctions.There are 14 pins on the comparator.You can search TS339 if you are looking for more pin-to-pin solutions.A quiescent current of 25μA is observed in this comparator.The board has a Surface Mount for mounting on a PCB or any other board.In order to operate the device, 3/5V power supplies are sufficient.A maximum current of 1pA can be supplied to the device.With a minimum current of 0.025mA , this part can be supplied.In this case, the part is from the Automotive, AEC-Q100 comparator series.
TS339IYDT Features
CMOS, Open-Drain output capability
General Purpose IC
Employing 4 elements
Operates under -40°C~125°C
Quiescent Current: 25μA
TS339IYDT Applications
There are a lot of STMicroelectronics TS339IYDT linear comparators applications.
- Power management
- Battery-Powered Electronics
- Automatic Test Equipment
- Pulse, Squarewave, and Time Delay Generators
- Alarm and Monitoring Circuits
- Battery management and protection
- Wireless Base Stations
- Portable Battery Monitoring
- Zero-Crossing Detectors
- Battery-Powered Electronics
