TS3702CD
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 8 |
| Operating Temperature | 0°C~70°C |
| Packaging | Tube |
| JESD-609 Code | e4 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Type | General Purpose |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Comparator |
| Max Power Dissipation | 710mW |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Supply Voltage | 3V |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | TS3702 |
| Pin Count | 8 |
| Output Type | CMOS, Push-Pull |
| Number of Elements | 2 |
| Nominal Supply Current | 40μA |
| Power Dissipation | 710mW |
| Output Current | 20mA |
| Max Supply Current | 20μA |
| Quiescent Current | 25μA |
| Response Time | 1.5 μs |
| Common Mode Rejection Ratio | 82 dB |
| Voltage - Supply, Single/Dual (±) | 2.7V~16V ±1.35V~8V |
| Output Current per Channel | 4mA |
| Input Offset Voltage (Vos) | 5mV |
| Average Bias Current-Max (IIB) | 0.0006μA |
| Power Supply Rejection Ratio (PSRR) | 90dB |
| Max Input Current | 1pA |
| Input Bias Current | 1pA |
| Voltage - Input Offset (Max) | 5mV @ 10V |
| Current - Input Bias (Max) | 1pA @ 5V |
| CMRR, PSRR (Typ) | 82dB CMRR |
| Height Seated (Max) | 1.75mm |
| Length | 4.9mm |
| Width | 3.9mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TS3702CD Overview
Electronic comparator is packaged in 8-SOIC (0.154, 3.90mm Width) for convenient transportation.Output type CMOS, Push-Pull is used for this comparator.As a result, it is designed with Tube package.There are 8 terminals on the comparator.Electronic comparator is a part of Comparator family.The comparator is capable of achieving many demanding tasks when supplied with 3V voltage.A comparator of this type is typically of type General Purpose .Currently, it consists of only 2 elements.The device includes 8 pins.The recommended mounting type is Surface Mount .Electronic comparator is recommended that the operating temperature be set to 0°C~70°C in order to prevent malfunctions.Electronic comparator has 8 pins.You can find more pin-to-pin solutions by searching TS3702 .There is 25μA current flowing in this comparator.The PCB or other board has a Surface Mount for mounting.The nominal supply current of the device should be 40μA for normal use.A supply current exceeding 20μA may result in the comparator malfunctioning.Electronic comparator is possible to input a maximum current of 1pA into the device.
TS3702CD Features
CMOS, Push-Pull output capability
General Purpose IC
Employing 2 elements
Operates under 0°C~70°C
Quiescent Current: 25μA
TS3702CD Applications
There are a lot of STMicroelectronics TS3702CD linear comparators applications.
- Laptop Computers
- Mobile Phones
- Power Supervision
- System control and monitoring
- Security Detection Systems
- Consumer Medical Electronics
- Automatic Test Equipment
- High-Speed Sampling Circuits
- Building automation
- Point of load regulators
