TS3702ID
| Parameters | |
|---|---|
| Contact Plating | Gold |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 8 |
| Operating Temperature | -40°C~125°C |
| Packaging | Tube |
| JESD-609 Code | e4 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Type | General Purpose |
| Subcategory | Comparator |
| Max Power Dissipation | 710mW |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Supply Voltage | 3V |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | TS3702 |
| Pin Count | 8 |
| Output Type | CMOS, Push-Pull |
| Number of Elements | 2 |
| Nominal Supply Current | 40μA |
| Power Dissipation | 710mW |
| Output Current | 20mA |
| Max Supply Current | 20μA |
| Quiescent Current | 25μA |
| Response Time | 1.5 μs |
| Common Mode Rejection Ratio | 82 dB |
| Voltage - Supply, Single/Dual (±) | 2.7V~16V ±1.35V~8V |
| Output Current per Channel | 4mA |
| Input Offset Voltage (Vos) | 5mV |
| Average Bias Current-Max (IIB) | 0.0006μA |
| Power Supply Rejection Ratio (PSRR) | 90dB |
| Max Input Current | 1pA |
| Input Bias Current | 600pA |
| Voltage - Input Offset (Max) | 5mV @ 10V |
| Current - Input Bias (Max) | 1pA @ 5V |
| CMRR, PSRR (Typ) | 82dB CMRR |
| Natural Thermal Resistance | 175 °C/W |
| Height Seated (Max) | 1.75mm |
| Length | 4.9mm |
| Width | 3.9mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TS3702ID Overview
Electronic comparator is packaged in 8-SOIC (0.154, 3.90mm Width) for convenient transportation.Output type of this comparator is CMOS, Push-Pull .Ready for shipping in Tube package.The comparator has 8 terminals.The electrical component here belongs to the Comparator family.With a voltage of 3V supplied, the comparator is capable of performing a wide range of demanding tasks.In general, the chip type can be classified as General Purpose .A total of 2 elements can be found in it.Electronic comparator includes 8 pins.The recommended mounting type is Surface Mount .In order to avoid malfunctions, the operating temperature should be set to -40°C~125°C .The comparator consists of 8 pins.In case you are looking for more pin-to-pin solutions, you may want to search TS3702 .The comparator displays a quiescent current of 25μA .A Surface Mount is provided for mounting it onto a PCB or another board.Normally, the nominal supply current should be 40μA when using the device.Electronic comparator is possible for the comparator to malfunction if the current supply exceeds 20μA .Electronic comparator is possible to input a maximum of 1pA current into the device.
TS3702ID Features
CMOS, Push-Pull output capability
General Purpose IC
Employing 2 elements
Operates under -40°C~125°C
Quiescent Current: 25μA
TS3702ID Applications
There are a lot of STMicroelectronics TS3702ID linear comparators applications.
- Ultra-Low Power Systems
- General-Purpose, Low-Voltage Applications
- Current and voltage sensing
- Handheld Instruments
- Portable and Battery-Powered Systems
- System control and monitoring
- Consumer Medical Electronics
- Infotainment & cluster
- Power Supervision
- Point of load regulators
