Parameters |
Factory Lead Time |
1 Week |
Lifecycle Status |
ACTIVE (Last Updated: 7 months ago) |
Contact Plating |
Tin |
Mount |
Surface Mount |
Mounting Type |
Surface Mount |
Package / Case |
14-SOIC (0.154, 3.90mm Width) |
Number of Pins |
14 |
Operating Temperature |
0°C~70°C |
Packaging |
Tape & Reel (TR) |
JESD-609 Code |
e4 |
Part Status |
Active |
Moisture Sensitivity Level (MSL) |
1 (Unlimited) |
Number of Terminations |
14 |
ECCN Code |
EAR99 |
Type |
General Purpose |
Terminal Finish |
Nickel/Palladium/Gold (Ni/Pd/Au) |
Subcategory |
Comparator |
Max Power Dissipation |
830mW |
Terminal Position |
DUAL |
Terminal Form |
GULL WING |
Peak Reflow Temperature (Cel) |
260 |
Number of Functions |
4 |
Supply Voltage |
3V |
Terminal Pitch |
1.27mm |
Time@Peak Reflow Temperature-Max (s) |
30 |
Base Part Number |
TS3704 |
Pin Count |
14 |
Output Type |
CMOS, Push-Pull |
Number of Elements |
4 |
Power Supplies |
5V |
Nominal Supply Current |
80μA |
Power Dissipation |
830mW |
Output Current |
20mA |
Max Supply Current |
25μA |
Quiescent Current |
25μA |
Response Time |
1.2 μs |
Common Mode Rejection Ratio |
80 dB |
Voltage - Supply, Single/Dual (±) |
2.7V~16V ±1.35V~8V |
Output Current per Channel |
4mA |
Input Offset Voltage (Vos) |
5mV |
Average Bias Current-Max (IIB) |
0.0006μA |
Power Supply Rejection Ratio (PSRR) |
92dB |
Supply Voltage Limit-Max |
18V |
Max Input Current |
1pA |
Input Bias Current |
600pA |
Voltage - Input Offset (Max) |
5mV @ 10V |
Current - Input Bias (Max) |
1pA @ 5V |
CMRR, PSRR (Typ) |
80dB CMRR |
Height |
1.65mm |
Length |
8.75mm |
Width |
4mm |
Radiation Hardening |
No |
RoHS Status |
ROHS3 Compliant |
Lead Free |
Lead Free |
TS3704CDT Overview
The product is packaged in 14-SOIC (0.154, 3.90mm Width) to facilitate transportation.The comparator has an output type of CMOS, Push-Pull .The chip is packaged with Tape & Reel (TR) .The comparator has a total of 14 terminals.Electronic comparator is a part of Comparator family.The comparator is capable of achieving many demanding tasks when supplied with 3V voltage.Electronic comparator is possible to classify the chip as General Purpose .This is a 4 element comparator.As a result, it contains 14 pins.The recommended mounting type is Surface Mount .A temperature setting of 0°C~70°C should be used for the operating temperature in order to prevent malfunctions.This comparator has 14 pins.In case you are looking for more pin-to-pin solutions, you may want to search TS3704 .There is 25μA current flowing in this comparator.The PCB or other board has a Surface Mount for mounting.For normal use of the device, the nominal supply current should be 80μA .If the current supply exceeds 25μA , the comparator might be damaged.5V power supplies are enough to run the device.You can input a maximum current of 1pA into this device.
TS3704CDT Features
CMOS, Push-Pull output capability
General Purpose IC
Employing 4 elements
Operates under 0°C~70°C
Quiescent Current: 25μA
TS3704CDT Applications
There are a lot of STMicroelectronics TS3704CDT linear comparators applications.
- Zero-Crossing Detectors
- DC/DC and AC/DC power supplies
- Power management
- Mobile Phones and Tablets
- General Purpose Low Voltage Applications
- Security Detection Systems
- Set Top Boxes
- Automatic Test Equipment
- High-Speed Differential Line Receiver
- Body Control Modules