TS3704ID
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 14-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 14 |
| Operating Temperature | -40°C~125°C |
| Packaging | Tube |
| JESD-609 Code | e4 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 14 |
| Termination | SMD/SMT |
| ECCN Code | EAR99 |
| Type | General Purpose |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Comparator |
| Max Power Dissipation | 830mW |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 4 |
| Supply Voltage | 3V |
| Terminal Pitch | 1.27mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | TS3704 |
| Pin Count | 14 |
| Output Type | CMOS, Push-Pull |
| Number of Elements | 4 |
| Power Supplies | 5V |
| Nominal Supply Current | 80μA |
| Power Dissipation | 830mW |
| Output Current | 20mA |
| Max Supply Current | 25μA |
| Quiescent Current | 25μA |
| Response Time | 2 μs |
| Common Mode Rejection Ratio | 80 dB |
| Voltage - Supply, Single/Dual (±) | 2.7V~16V ±1.35V~8V |
| Output Current per Channel | 4mA |
| Input Offset Voltage (Vos) | 5mV |
| Average Bias Current-Max (IIB) | 0.0006μA |
| Power Supply Rejection Ratio (PSRR) | 92dB |
| Supply Voltage Limit-Max | 18V |
| Max Input Current | 1pA |
| Input Bias Current | 1pA |
| Voltage - Input Offset (Max) | 5mV @ 10V |
| Current - Input Bias (Max) | 1pA @ 5V |
| CMRR, PSRR (Typ) | 80dB CMRR |
| Height Seated (Max) | 1.75mm |
| Length | 8.65mm |
| Width | 3.9mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TS3704ID Overview
To facilitate transportation, it comes packaged in 14-SOIC (0.154, 3.90mm Width) .The comparator has a type CMOS, Push-Pull output.The chip is packaged with Tube .The device is designed with 14 terminations.The electrical component in this case belongs to the Comparator families.Supplied by 3V voltage, the comparator can accomplish the many demanding tasks.In terms of type, this is a typical General Purpose comparator.The total number of elements is 4 .The device contains 14 pins.Electronic comparator is recommended that you mount the device using type Surface Mount .To ensure proper functioning, the operating temperature should be set to -40°C~125°C .There are 14 pins on the comparator.You can find more pin-to-pin solutions for your special requirements by searching TS3704 .This comparator presents a quiescent current of 25μA .There is a Surface Mount on the board for mounting to a PCB or other board.Electronic comparator is recommended that the nominal supply current of the device be 80μA .An excess of current supply over 25μA could result in malfunction of the comparator.The device can be operated with 5V power supplies.You can input a maximum current of 1pA into this device.
TS3704ID Features
CMOS, Push-Pull output capability
General Purpose IC
Employing 4 elements
Operates under -40°C~125°C
Quiescent Current: 25μA
TS3704ID Applications
There are a lot of STMicroelectronics TS3704ID linear comparators applications.
- Notebooks and PDAs
- Zero-Crossing Detectors
- Portable and Battery-Powered Systems
- Wireless Base Stations
- Set Top Boxes
- Power Supervision
- Analog front end
- Mobile Phones and Tablets
- Laptop Computers
- Portable Battery Monitoring
