TS3704IDT
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 7 months ago) |
| Contact Plating | Tin |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 14-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 14 |
| Operating Temperature | -40°C~125°C |
| Packaging | Cut Tape (CT) |
| JESD-609 Code | e4 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 14 |
| ECCN Code | EAR99 |
| Type | General Purpose |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Comparator |
| Max Power Dissipation | 830mW |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 4 |
| Supply Voltage | 3V |
| Terminal Pitch | 1.27mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | TS3704 |
| Pin Count | 14 |
| Output Type | CMOS, Push-Pull |
| Number of Elements | 4 |
| Power Supplies | 5V |
| Nominal Supply Current | 80μA |
| Power Dissipation | 830mW |
| Output Current | 20mA |
| Max Supply Current | 25μA |
| Quiescent Current | 25μA |
| Response Time | 1.2 μs |
| Common Mode Rejection Ratio | 80 dB |
| Voltage - Supply, Single/Dual (±) | 2.7V~16V ±1.35V~8V |
| Output Current per Channel | 4mA |
| Input Offset Voltage (Vos) | 5mV |
| Average Bias Current-Max (IIB) | 0.0006μA |
| Power Supply Rejection Ratio (PSRR) | 92dB |
| Supply Voltage Limit-Max | 18V |
| Max Input Current | 1pA |
| Input Bias Current | 600pA |
| Voltage - Input Offset (Max) | 5mV @ 10V |
| Current - Input Bias (Max) | 1pA @ 5V |
| CMRR, PSRR (Typ) | 80dB CMRR |
| Height Seated (Max) | 1.75mm |
| Length | 8.65mm |
| Width | 3.9mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TS3704IDT Overview
Electronic comparator is packaged in 14-SOIC (0.154, 3.90mm Width) for convenient transportation.Output type of this comparator is CMOS, Push-Pull .This device is designed in Cut Tape (CT) case.There are 14 terminals on the comparator.Electronic comparator is a component of the Comparator family.With a voltage of 3V supplied, the comparator is capable of performing a wide range of demanding tasks.Electronic comparator can be classified as a General Purpose chip.Currently, it consists of only 4 elements.A total of 14 pins are included.Surface Mount universial mout for easy adapting.If you want to avoid malfunction, you should set the operating temperature to -40°C~125°C .The comparator has a pin count of 14 .If you require more pin-to-pin solutions, search TS3704 for more options.There is a quiescent current of 25μA in this comparator.A Surface Mount is provided for mounting it onto a PCB or another board.Electronic comparator is recommended that the nominal supply current for the device be set to 80μA .A current supply greater than 25μA may result in the comparator malfunctioning.The device can be powered by 5V power supplies.Input current to the device is limited to 1pA .
TS3704IDT Features
CMOS, Push-Pull output capability
General Purpose IC
Employing 4 elements
Operates under -40°C~125°C
Quiescent Current: 25μA
TS3704IDT Applications
There are a lot of STMicroelectronics TS3704IDT linear comparators applications.
- Wide Range VCO; MOS Clock Timers
- Industrial
- Laptop Computers
- System control and monitoring
- Automotive
- Multivibrators and High-Voltage Digital Logic Gates
- Zero-Crossing Detectors
- Power Supervision
- Self-diagnostics
- Threshold Detectors
