TS3704IPT
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 6 months ago) |
| Contact Plating | Gold |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 14-TSSOP (0.173, 4.40mm Width) |
| Number of Pins | 14 |
| Operating Temperature | -40°C~125°C |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 14 |
| ECCN Code | EAR99 |
| Type | General Purpose |
| Subcategory | Comparator |
| Max Power Dissipation | 710mW |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 4 |
| Supply Voltage | 3V |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | TS3704 |
| Pin Count | 14 |
| Output Type | CMOS, Push-Pull |
| Number of Elements | 4 |
| Power Supplies | 5V |
| Nominal Supply Current | 80μA |
| Power Dissipation | 710mW |
| Output Current | 20mA |
| Max Supply Current | 25μA |
| Propagation Delay | 1.2 μs |
| Quiescent Current | 25μA |
| Turn On Delay Time | 1.2 μs |
| Response Time | 2 μs |
| Common Mode Rejection Ratio | 80 dB |
| Voltage - Supply, Single/Dual (±) | 2.7V~16V ±1.35V~8V |
| Output Current per Channel | 20mA |
| Input Offset Voltage (Vos) | 5mV |
| Average Bias Current-Max (IIB) | 0.0006μA |
| Power Supply Rejection Ratio (PSRR) | 92dB |
| Supply Voltage Limit-Max | 18V |
| Max Input Current | 1pA |
| Dual Supply Voltage | 5V |
| Input Bias Current | 600pA |
| Max Junction Temperature (Tj) | 150°C |
| Voltage - Input Offset (Max) | 5mV @ 10V |
| Current - Input Bias (Max) | 1pA @ 5V |
| CMRR, PSRR (Typ) | 80dB CMRR |
| Height | 1.2mm |
| Length | 5mm |
| Width | 4.4mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TS3704IPT Overview
Electronic comparator is packaged in 14-TSSOP (0.173, 4.40mm Width) for convenient transportation.This comparator is of the CMOS, Push-Pull output type.This chip is designed with the Tape & Reel (TR) package.The comparator has a total of 14 terminals.The electrical component here belongs to the Comparator family.A comparator is capable of completing a variety of demanding tasks when supplied with 3V voltage.Speaking of types, this is a typical General Purpose comparator.There are a total of 4 elements in it.Electronic comparator includes 14 pins.The recommended mounting type is Surface Mount .Electronic comparator is recommended that the operating temperature be set to -40°C~125°C to prevent malfunctions.The comparator consists of 14 pins.Search TS3704 to find more pin-to-pin solutions.There is a quiescent current of 25μA in this comparator.A Surface Mount is provided for mounting on PCBs or other boards.Normally, the nominal supply current should be 80μA .An excess of current supply over 25μA could result in malfunction of the comparator.This device requires 5V power supplies to operate.You are allowed to input a maximum current of 1pA into the device.
TS3704IPT Features
CMOS, Push-Pull output capability
General Purpose IC
Employing 4 elements
Operates under -40°C~125°C
Quiescent Current: 25μA
TS3704IPT Applications
There are a lot of STMicroelectronics TS3704IPT linear comparators applications.
- Security Detection Systems
- Self-diagnostics
- Building automation
- DC/DC and AC/DC power supplies
- High-Speed Sampling Circuits
- Power management
- Battery-Powered Electronics
- Handheld Instruments
- Notebooks and PDAs
- System control and monitoring
