TS372CDT
| Parameters | |
|---|---|
| Response Time | 600 ns |
| Voltage - Supply, Single/Dual (±) | 3V~16V ±1.5V~8V |
| Output Current per Channel | 45mA |
| Input Offset Voltage (Vos) | 10mV |
| Average Bias Current-Max (IIB) | 0.00015μA |
| Max Input Current | 1pA |
| Dual Supply Voltage | 5V |
| Input Bias Current | 150pA |
| Voltage - Input Offset (Max) | 10mV @ 5V |
| Height | 1.5mm |
| Length | 5mm |
| Width | 4mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 7 months ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 8 |
| Operating Temperature | 0°C~70°C |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Type | Differential |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Comparator |
| Max Power Dissipation | 710mW |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Supply Voltage | 5V |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | TS372 |
| Pin Count | 8 |
| Output Type | CMOS, MOS, Open-Drain, TTL |
| Number of Elements | 2 |
| Power Supplies | 5V |
| Nominal Supply Current | 750μA |
| Power Dissipation | 710mW |
| Output Current | 20mA |
| Max Supply Current | 375μA |
| Quiescent Current | 375μA |
TS372CDT Overview
A convenient transport package is provided in 8-SOIC (0.154, 3.90mm Width) .There is a comparator of type CMOS, MOS, Open-Drain, TTL output on this device.This package has been designed with Tape & Reel (TR) .Electronic comparator is possible to find the 8 terminals of the comparator.The electrical component here belongs to the Comparator family.This comparator is capable of handling a wide range of tasks if it is supplied with a voltage of 5V .The type of the chip can be classified as Differential .This is a 2 element comparator.A total of 8 pins are included.A Surface Mount mounting type is recommended.A temperature setting of 0°C~70°C should be used for the operating temperature in order to prevent malfunctions.The comparator has a pin count of 8 .You can find more pin-to-pin solutions by searching TS372 .The comparator presents a quiescent current of 375μA volts.This component has a Surface Mount mount for mounting to PCBs or other boards.Normally, the nominal supply current should be 750μA .If the current supply exceeds 375μA , the comparator could malfunction.5V power supplies are enough to run the device.Electronic comparator is possible to input up to 1pA current into the device.
TS372CDT Features
CMOS, MOS, Open-Drain, TTL output capability
Differential IC
Employing 2 elements
Operates under 0°C~70°C
Quiescent Current: 375μA
TS372CDT Applications
There are a lot of STMicroelectronics TS372CDT linear comparators applications.
- Laptop Computers
- General-Purpose Portable Devices
- Multivibrators and High-Voltage Digital Logic Gates
- Zero-Crossing Detectors
- Industrial
- Automotive
- Automatic Test Equipment
- Portable Battery Monitoring
- Alarm and Monitoring Circuits
- Window Comparators, Multivibrators
