Parameters |
Factory Lead Time |
1 Week |
Lifecycle Status |
ACTIVE (Last Updated: 7 months ago) |
Contact Plating |
Tin |
Mount |
Surface Mount |
Mounting Type |
Surface Mount |
Package / Case |
8-SOIC (0.154, 3.90mm Width) |
Number of Pins |
8 |
Operating Temperature |
-40°C~125°C |
Packaging |
Cut Tape (CT) |
JESD-609 Code |
e4 |
Part Status |
Active |
Moisture Sensitivity Level (MSL) |
1 (Unlimited) |
Number of Terminations |
8 |
ECCN Code |
EAR99 |
Type |
Differential |
Terminal Finish |
Nickel/Palladium/Gold (Ni/Pd/Au) |
Subcategory |
Comparator |
Max Power Dissipation |
710mW |
Terminal Position |
DUAL |
Terminal Form |
GULL WING |
Peak Reflow Temperature (Cel) |
260 |
Number of Functions |
2 |
Supply Voltage |
5V |
Time@Peak Reflow Temperature-Max (s) |
30 |
Base Part Number |
TS372 |
Pin Count |
8 |
Output Type |
CMOS, MOS, Open-Drain, TTL |
Operating Supply Voltage |
15V |
Number of Elements |
2 |
Power Supplies |
5V |
Nominal Supply Current |
750μA |
Power Dissipation |
710mW |
Output Current |
20mA |
Max Supply Current |
375μA |
Quiescent Current |
375μA |
Response Time |
600 ns |
Voltage - Supply, Single/Dual (±) |
3V~16V ±1.5V~8V |
Output Current per Channel |
45mA |
Input Offset Voltage (Vos) |
10mV |
Average Bias Current-Max (IIB) |
0.0003μA |
Max Input Current |
1pA |
Dual Supply Voltage |
5V |
Input Bias Current |
1pA |
Voltage - Input Offset (Max) |
10mV @ 5V |
Height |
1.25mm |
Length |
5mm |
Width |
4mm |
Radiation Hardening |
No |
REACH SVHC |
No SVHC |
RoHS Status |
ROHS3 Compliant |
Lead Free |
Lead Free |
TS372IDT Overview
A convenient transport package is provided in 8-SOIC (0.154, 3.90mm Width) .A comparator with an output type of CMOS, MOS, Open-Drain, TTL is being used.This package has been designed with Cut Tape (CT) .As you can see, the comparator has8 terminals.The electrical component in this case belongs to the Comparator families.The comparator is capable of achieving many demanding tasks when supplied with 5V voltage.Electronic comparator can be classified as a Differential chip.In total, it contains 2 elements.There are 8 pins on this board.A Surface Mount mounting type is recommended.To ensure proper functioning, the operating temperature should be set to -40°C~125°C .The comparator consists of 8 pins.You can find more pin-to-pin solutions by searching TS372 .There is 375μA current flowing in this comparator.There is a Surface Mount for mounting it on a PCB or other board.Normally, the nominal supply current should be 750μA .An excess of current supply over 375μA could result in malfunction of the comparator.A power supply of 5V is sufficient for the operation of the device.Input current to the device is limited to 1pA .The operating supply voltage for normal operation should be 15V .
TS372IDT Features
CMOS, MOS, Open-Drain, TTL output capability
Differential IC
Employing 2 elements
Operates under -40°C~125°C
Quiescent Current: 375μA
TS372IDT Applications
There are a lot of STMicroelectronics TS372IDT linear comparators applications.
- Simple Analog-to-Digital Converters (ADCs)
- Automotive
- Appliances
- Handheld Instruments
- Battery management and protection
- Factory automation & control
- Laptop Computers
- Multivibrators and High-Voltage Digital Logic Gates
- Window Comparators, Multivibrators
- Mobile Communications