TS374ID
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 14-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 14 |
| Operating Temperature | -40°C~125°C |
| Packaging | Tube |
| JESD-609 Code | e4 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 14 |
| ECCN Code | EAR99 |
| Type | Differential |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Comparator |
| Max Power Dissipation | 830mW |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 4 |
| Supply Voltage | 5V |
| Terminal Pitch | 1.27mm |
| Base Part Number | TS374 |
| Pin Count | 14 |
| Output Type | CMOS, MOS, Open-Drain, TTL |
| Number of Elements | 4 |
| Power Supplies | 5V |
| Nominal Supply Current | 250μA |
| Power Dissipation | 830mW |
| Output Current | 20mA |
| Max Supply Current | 250μA |
| Quiescent Current | 250μA |
| Response Time | 600 ns |
| Voltage - Supply, Single/Dual (±) | 3V~16V ±1.5V~8V |
| Output Current per Channel | 100pA |
| Input Offset Voltage (Vos) | 10mV |
| Average Bias Current-Max (IIB) | 0.0003μA |
| Supply Voltage Limit-Max | 18V |
| Input Bias Current | 1pA |
| Voltage - Input Offset (Max) | 10mV @ 5V |
| Current - Input Bias (Max) | 1pA @ 5V |
| Height Seated (Max) | 1.75mm |
| Length | 8.65mm |
| Width | 3.9mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TS374ID Overview
To facilitate transportation, it comes packaged in 14-SOIC (0.154, 3.90mm Width) .Output type of this comparator is CMOS, MOS, Open-Drain, TTL .Ready for shipping in Tube package.There are14 terminals on the comparator.The component belongs to the Comparator family of electrical components.Electronic comparator is capable of performing numerous tasks when powered by 5V voltage.In general, the chip type can be classified as Differential .A total of 4 elements can be found in it.A total of 14 pins are included.Electronic comparator is recommended to mount the device using type Surface Mount .To ensure proper functioning, the operating temperature should be set to -40°C~125°C .The comparator has a pin count of 14 .You may wish to search TS374 for more solutions that address your specific needs.A quiescent current of 250μA is observed in this comparator.A Surface Mount is provided for mounting on PCBs or other boards.For normal use of the device, the nominal supply current should be 250μA .An excess of current supply over 250μA could result in malfunction of the comparator.In order to operate the device, 5V power supplies are sufficient.
TS374ID Features
CMOS, MOS, Open-Drain, TTL output capability
Differential IC
Employing 4 elements
Operates under -40°C~125°C
Quiescent Current: 250μA
TS374ID Applications
There are a lot of STMicroelectronics TS374ID linear comparators applications.
- Factory automation & control
- Analog front end
- Alarm and Monitoring Circuits
- Laptop Computers
- High-Speed Differential Line Receiver
- Portable and Battery-Powered Systems
- System control and monitoring
- High-Speed Sampling Circuits
- Pulse, Squarewave, and Time Delay Generators
- Zero-Crossing Detectors
