TS374IN
| Parameters | |
|---|---|
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | 14-DIP (0.300, 7.62mm) |
| Number of Pins | 14 |
| Operating Temperature | -40°C~125°C |
| Packaging | Tube |
| JESD-609 Code | e3 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 14 |
| ECCN Code | EAR99 |
| Type | Differential |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Comparator |
| Max Power Dissipation | 1.5W |
| Terminal Position | DUAL |
| Number of Functions | 4 |
| Supply Voltage | 5V |
| Base Part Number | TS374 |
| Pin Count | 14 |
| Output Type | CMOS, MOS, Open-Drain, TTL |
| Number of Elements | 4 |
| Power Supplies | 5V |
| Nominal Supply Current | 250μA |
| Power Dissipation | 1.5W |
| Output Current | 20mA |
| Max Supply Current | 250μA |
| Quiescent Current | 250μA |
| Response Time | 600 ns |
| Voltage - Supply, Single/Dual (±) | 3V~16V ±1.5V~8V |
| Output Current per Channel | 100pA |
| Input Offset Voltage (Vos) | 10mV |
| Average Bias Current-Max (IIB) | 0.0003μA |
| Supply Voltage Limit-Max | 18V |
| Input Bias Current | 1pA |
| Voltage - Input Offset (Max) | 10mV @ 5V |
| Current - Input Bias (Max) | 1pA @ 5V |
| Height Seated (Max) | 5.1mm |
| Width | 7.62mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
TS374IN Overview
A convenient packaging is provided in the form of 14-DIP (0.300, 7.62mm) .This comparator is of the CMOS, MOS, Open-Drain, TTL output type.Ready for shipping in Tube package.As you can see, the comparator has14 terminals.The component belongs to the Comparator family of electrical components.With a 5V voltage supply, the comparator can perform multiple demanding tasks.The type of the chip can be classified as Differential .The total number of elements is 4 .There are 14 pins on this board.The recommended mounting type is Through Hole .A temperature setting of -40°C~125°C should be used for the operating temperature in order to prevent malfunctions.The comparator has 14 pins.Try search TS374 to get more pin-to-pin solutions for your special needs.A quiescent current of 250μA is observed in this comparator.There is a Through Hole for mounting it on a PCB or other board.Normally, the nominal supply current should be 250μA when using the device.The compartator could be damaged if the current supply exceeds 250μA .Electronic comparator is sufficient to run the device wElectronic comparatorh 5V power supplies.
TS374IN Features
CMOS, MOS, Open-Drain, TTL output capability
Differential IC
Employing 4 elements
Operates under -40°C~125°C
Quiescent Current: 250μA
TS374IN Applications
There are a lot of STMicroelectronics TS374IN linear comparators applications.
- Portable Battery Monitoring
- Metering Systems
- Window Comparators
- Wearable Devices
- General-Purpose, Low-Voltage Applications
- Notebooks and PDAs
- Mobile Phones and Tablets
- Security Detection Systems
- High-Speed Differential Line Receiver
- Motor drives
