TS391ILT
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 7 months ago) |
| Contact Plating | Tin |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | SC-74A, SOT-753 |
| Number of Pins | 5 |
| Weight | 4.535924g |
| Operating Temperature | -40°C~125°C |
| Packaging | Cut Tape (CT) |
| JESD-609 Code | e3 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 5 |
| ECCN Code | EAR99 |
| Type | General Purpose |
| Subcategory | Comparator |
| Max Power Dissipation | 500mW |
| Technology | BIPOLAR |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Base Part Number | TS391 |
| Pin Count | 5 |
| Output Type | CMOS, DTL, ECL, Open-Collector, TTL |
| Number of Circuits | 1 |
| Nominal Supply Current | 500μA |
| Power Dissipation | 500mW |
| Output Current | 16mA |
| Max Supply Current | 500μA |
| Quiescent Current | 1.25mA |
| Response Time | 1.3 μs |
| Voltage - Supply, Single/Dual (±) | 2V~36V ±1V~18V |
| Output Current per Channel | 16mA |
| Input Offset Voltage (Vos) | 1mV |
| Voltage Gain | 106.02dB |
| Average Bias Current-Max (IIB) | 0.4μA |
| Supply Voltage Limit-Max | 36V |
| Max Input Current | 250nA |
| Dual Supply Voltage | 9V |
| Input Bias Current | 250nA |
| Max Junction Temperature (Tj) | 150°C |
| Voltage - Input Offset (Max) | 5mV @ 5V |
| Current - Input Bias (Max) | 0.25μA @ 5V |
| Natural Thermal Resistance | 250 °C/W |
| Current - Output (Typ) | 16mA @ 5V |
| Height | 1.45mm |
| Length | 3mm |
| Width | 1.75mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TS391ILT Overview
For convenience, it is packaged in SC-74A, SOT-753 .The comparator has an output type of CMOS, DTL, ECL, Open-Collector, TTL .This chip is designed with the Cut Tape (CT) package.The device is designed with 5 terminations.The electrical component in this case belongs to the Comparator families.In the presence of a 5V voltage, the comparator is capable of accomplishing a variety of demanding tasks.A comparator of this type is typically of type General Purpose .The board includes 5 pins.Surface Mount universial mout for easy adapting.Electronic comparator is recommended that the operating temperature be set to -40°C~125°C to prevent malfunctions.There are 5 pins on the comparator.If you require more pin-to-pin solutions, search TS391 for more options.There is a quiescent current of 1.25mA in this comparator.There is a Surface Mount for mounting it on a PCB or other board.Electronic comparator is recommended that the nominal supply current for the device be set to 500μA .Current supply exceeding 500μA could cause disfunction of the compartator.You can input a maximum current of 250nA into this device.The voltage gain of the part is indicated by 106.02dB in the voltage formula.
TS391ILT Features
CMOS, DTL, ECL, Open-Collector, TTL output capability
General Purpose IC
Operates under -40°C~125°C
Quiescent Current: 1.25mA
Voltage Gain: 106.02dB
TS391ILT Applications
There are a lot of STMicroelectronics TS391ILT linear comparators applications.
- Hand-Held Electronics
- Multivibrators and High-Voltage Digital Logic Gates
- Laptop Computers
- Mobile Phones
- Wide Range VCO; MOS Clock Timers
- Power Supervision
- Factory automation & control
- Set Top Boxes
- General Purpose Low Voltage Applications
- Notebooks and PDAs
