Parameters |
Factory Lead Time |
1 Week |
Lifecycle Status |
ACTIVE (Last Updated: 7 months ago) |
Mount |
Surface Mount |
Mounting Type |
Surface Mount |
Package / Case |
8-UFDFN Exposed Pad |
Number of Pins |
8 |
Operating Temperature |
-40°C~125°C |
Packaging |
Tape & Reel (TR) |
JESD-609 Code |
e3 |
Part Status |
Active |
Moisture Sensitivity Level (MSL) |
1 (Unlimited) |
Number of Terminations |
8 |
ECCN Code |
EAR99 |
Type |
General Purpose |
Terminal Finish |
Matte Tin (Sn) - annealed |
Subcategory |
Comparator |
Technology |
BIPOLAR |
Terminal Position |
DUAL |
Peak Reflow Temperature (Cel) |
260 |
Number of Functions |
1 |
Supply Voltage |
5V |
Terminal Pitch |
0.5mm |
Time@Peak Reflow Temperature-Max (s) |
30 |
Base Part Number |
TS391 |
Output Type |
CMOS, DTL, ECL, Open-Collector, TTL |
Number of Elements |
1 |
Nominal Supply Current |
500μA |
Output Current |
16mA |
Max Supply Current |
500μA |
Quiescent Current |
500μA |
Response Time |
1.3 μs |
Voltage - Supply, Single/Dual (±) |
2V~36V ±1V~18V |
Output Current per Channel |
100pA |
Input Offset Voltage (Vos) |
5mV |
Voltage Gain |
106.02dB |
Average Bias Current-Max (IIB) |
0.4μA |
Supply Voltage Limit-Max |
36V |
Max Input Current |
250nA |
Input Bias Current |
250nA |
Voltage - Input Offset (Max) |
1mV @ 5V |
Current - Input Bias (Max) |
0.25μA @ 5V |
Natural Thermal Resistance |
57 °C/W |
Current - Output (Typ) |
16mA @ 5V |
Height Seated (Max) |
0.6mm |
Length |
2mm |
Width |
2mm |
Radiation Hardening |
No |
RoHS Status |
ROHS3 Compliant |
Lead Free |
Lead Free |
TS391IQ2T Overview
A convenient transport package is provided in 8-UFDFN Exposed Pad .The comparator has a type CMOS, DTL, ECL, Open-Collector, TTL output.Ready for shipping in Tape & Reel (TR) package.There are 8 terminals on the comparator.The component belongs to the Comparator family of electrical components.This comparator is capable of handling a wide range of tasks if it is supplied with a voltage of 5V .In terms of type, this is a typical General Purpose comparator.This is a 1 element comparator.The recommended mounting method is Surface Mount .If you want to avoid malfunction, you should set the operating temperature to -40°C~125°C .The comparator is equipped with 8 pins.You can find more pin-to-pin solutions by searching TS391 .A quiescent current of 500μA is observed in this comparator.This component has a Surface Mount mount for mounting to PCBs or other boards.Normally, the nominal supply current should be 500μA when using the device.Electronic comparator is possible for the comparator to malfunction when the current supply exceeds 500μA .You can input a maximum current of 250nA into this device.Comparator electronics follows that the voltage gain of the part is 106.02dB .
TS391IQ2T Features
CMOS, DTL, ECL, Open-Collector, TTL output capability
General Purpose IC
Employing 1 elements
Operates under -40°C~125°C
Quiescent Current: 500μA
Voltage Gain: 106.02dB
TS391IQ2T Applications
There are a lot of STMicroelectronics TS391IQ2T linear comparators applications.
- Analog front end
- Security Detection Systems
- Point of load regulators
- Building automation
- RC Timers
- General-Purpose Portable Devices
- Window Comparators, Multivibrators
- Mobile Phones
- Infotainment & cluster
- Portable Battery Monitoring