TS393CD
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 8 |
| Operating Temperature | 0°C~70°C |
| Packaging | Tube |
| JESD-609 Code | e4 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Type | General Purpose |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Comparator |
| Max Power Dissipation | 710mW |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Supply Voltage | 3V |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | TS393 |
| Pin Count | 8 |
| Output Type | CMOS, Open-Drain |
| Operating Supply Voltage | 15V |
| Number of Elements | 2 |
| Power Supplies | 5V |
| Nominal Supply Current | 20μA |
| Power Dissipation | 710mW |
| Output Current | 20mA |
| Max Supply Current | 20μA |
| Quiescent Current | 25μA |
| Response Time | 1.5 μs |
| Common Mode Rejection Ratio | 71 dB |
| Voltage - Supply, Single/Dual (±) | 2.7V~16V ±1.35V~8V |
| Output Current per Channel | 2nA |
| Input Offset Voltage (Vos) | 5mV |
| Average Bias Current-Max (IIB) | 0.0006μA |
| Power Supply Rejection Ratio (PSRR) | 80dB |
| Dual Supply Voltage | 5V |
| Input Bias Current | 1pA |
| Voltage - Input Offset (Max) | 5mV @ 10V |
| Current - Input Bias (Max) | 1pA @ 5V |
| CMRR, PSRR (Typ) | 71dB CMRR |
| Height | 1.25mm |
| Length | 4.9mm |
| Width | 3.9mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TS393CD Overview
The product is packaged in 8-SOIC (0.154, 3.90mm Width) to facilitate transportation.Output type of this comparator is CMOS, Open-Drain .Electronic comparator is shipped by Tube .The comparator has 8 terminals.Electronic comparator is a part of Comparator family.When supplied with 3V voltage, the comparator is capable of performing a wide range of tasks.Electronic comparator can be classified as a General Purpose chip.This is a 2 element comparator.The board includes 8 pins.The recommended mounting type is Surface Mount .If you want to avoid malfunction, you should set the operating temperature to 0°C~70°C .8 pins are available on the comparator.Try search TS393 to get more pin-to-pin solutions for your special needs.There is a quiescent current of 25μA in this comparator.The PCB or other board has a Surface Mount for mounting.Normal operation of the device requires a nominal supply current of 20μA .The compartator could be damaged if the current supply exceeds 20μA .5V power supplies are enough to run the device.Comparator electronics is necessary to have an operating supply voltage of 15V for normal operation.
TS393CD Features
CMOS, Open-Drain output capability
General Purpose IC
Employing 2 elements
Operates under 0°C~70°C
Quiescent Current: 25μA
TS393CD Applications
There are a lot of STMicroelectronics TS393CD linear comparators applications.
- Zero-Crossing Detectors
- Lithium ion battery monitoring
- Limit Comparators
- Handheld Instruments
- Power management
- Notebooks and PDAs
- Simple Analog-to-Digital Converters (ADCs)
- Ultra-Low Power Systems
- DC/DC and AC/DC power supplies
- Set Top Boxes
