Parameters |
Factory Lead Time |
1 Week |
Lifecycle Status |
ACTIVE (Last Updated: 7 months ago) |
Mount |
Surface Mount |
Mounting Type |
Surface Mount |
Package / Case |
8-SOIC (0.154, 3.90mm Width) |
Number of Pins |
8 |
Operating Temperature |
0°C~70°C |
Packaging |
Tape & Reel (TR) |
JESD-609 Code |
e4 |
Part Status |
Active |
Moisture Sensitivity Level (MSL) |
1 (Unlimited) |
Number of Terminations |
8 |
ECCN Code |
EAR99 |
Type |
General Purpose |
Terminal Finish |
Nickel/Palladium/Gold (Ni/Pd/Au) |
Subcategory |
Comparator |
Max Power Dissipation |
710mW |
Terminal Position |
DUAL |
Terminal Form |
GULL WING |
Peak Reflow Temperature (Cel) |
260 |
Number of Functions |
2 |
Supply Voltage |
3V |
Time@Peak Reflow Temperature-Max (s) |
30 |
Base Part Number |
TS393 |
Pin Count |
8 |
Output Type |
CMOS, Open-Drain |
Number of Elements |
2 |
Power Supplies |
5V |
Nominal Supply Current |
20μA |
Power Dissipation |
710mW |
Output Current |
20mA |
Max Supply Current |
20μA |
Quiescent Current |
25μA |
Response Time |
1.5 μs |
Common Mode Rejection Ratio |
71 dB |
Voltage - Supply, Single/Dual (±) |
2.7V~16V ±1.35V~8V |
Output Current per Channel |
2nA |
Input Offset Voltage (Vos) |
5mV |
Average Bias Current-Max (IIB) |
0.0006μA |
Power Supply Rejection Ratio (PSRR) |
80dB |
Max Input Current |
1pA |
Input Bias Current |
1pA |
Voltage - Input Offset (Max) |
5mV @ 10V |
Current - Input Bias (Max) |
1pA @ 5V |
CMRR, PSRR (Typ) |
71dB CMRR |
Natural Thermal Resistance |
125 °C/W |
Height |
1.5mm |
Length |
5mm |
Width |
4mm |
Radiation Hardening |
No |
REACH SVHC |
No SVHC |
RoHS Status |
ROHS3 Compliant |
Lead Free |
Lead Free |
TS393CDT Overview
The product is packaged in 8-SOIC (0.154, 3.90mm Width) for ease of transportation.The comparator has a CMOS, Open-Drain output.This chip is designed with the Tape & Reel (TR) package.The comparator has a total of 8 terminals.The electrical component in this case belongs to the Comparator families.A comparator supplied with 3V voltage can complete many demanding tasks.In general, the chip type can be classified as General Purpose .Electronic comparator consists of 2 elements in total.The device is equipped with 8 pins.Electronic comparator is recommended that you mount the device using type Surface Mount .In order to avoid malfunctions, the operating temperature should be set to 0°C~70°C .The comparator consists of 8 pins.You can find more pin-to-pin solutions by searching TS393 .This comparator presents a quiescent current of 25μA .The board has a Surface Mount for mounting on a PCB or any other board.Normal operation of the device requires a nominal supply current of 20μA .If the current supply exceeds 20μA , the comparator might be damaged.The device can be operated with 5V power supplies.Electronic comparator is possible to input a maximum current of 1pA into the device.
TS393CDT Features
CMOS, Open-Drain output capability
General Purpose IC
Employing 2 elements
Operates under 0°C~70°C
Quiescent Current: 25μA
TS393CDT Applications
There are a lot of STMicroelectronics TS393CDT linear comparators applications.
- Laptop Computers
- Mobile Phones and Tablets
- Metering Systems
- Wearable Devices
- Battery management and protection
- Wireless Base Stations
- Automatic Test Equipment
- High-Speed Sampling Circuits
- Portable Battery Monitoring
- Consumer Medical Electronics