Parameters |
Mount |
Through Hole |
Mounting Type |
Through Hole |
Package / Case |
8-DIP (0.300, 7.62mm) |
Number of Pins |
8 |
Operating Temperature |
-40°C~125°C |
Packaging |
Tube |
JESD-609 Code |
e3 |
Part Status |
Obsolete |
Moisture Sensitivity Level (MSL) |
1 (Unlimited) |
Number of Terminations |
8 |
ECCN Code |
EAR99 |
Type |
General Purpose |
Terminal Finish |
Matte Tin (Sn) |
Subcategory |
Comparator |
Max Power Dissipation |
1.25W |
Terminal Position |
DUAL |
Peak Reflow Temperature (Cel) |
NOT SPECIFIED |
Number of Functions |
2 |
Supply Voltage |
3V |
Time@Peak Reflow Temperature-Max (s) |
NOT SPECIFIED |
Base Part Number |
TS393 |
Pin Count |
8 |
Qualification Status |
Not Qualified |
Output Type |
CMOS, Open-Drain |
Number of Elements |
2 |
Power Supplies |
5V |
Nominal Supply Current |
20μA |
Power Dissipation |
1.25W |
Output Current |
20mA |
Max Supply Current |
20μA |
Quiescent Current |
25μA |
Response Time |
1.5 μs |
Common Mode Rejection Ratio |
71 dB |
Voltage - Supply, Single/Dual (±) |
2.7V~16V ±1.35V~8V |
Output Current per Channel |
2nA |
Input Offset Voltage (Vos) |
5mV |
Average Bias Current-Max (IIB) |
0.0006μA |
Power Supply Rejection Ratio (PSRR) |
80dB |
Input Bias Current |
600pA |
Voltage - Input Offset (Max) |
5mV @ 10V |
Current - Input Bias (Max) |
1pA @ 5V |
CMRR, PSRR (Typ) |
71dB CMRR |
RoHS Status |
ROHS3 Compliant |
Lead Free |
Lead Free |
TS393IN Overview
The product is packaged in 8-DIP (0.300, 7.62mm) in order to facilitate transportation.A comparator with a CMOS, Open-Drain output is used here.The part is shipped by Tube .The comparator has 8 terminals.The component belongs to the Comparator family of electrical components.The comparator is capable of achieving many demanding tasks when supplied with 3V voltage.Electronic comparator is possible to classify the chip as General Purpose .This element consists of 2 elements in total.The pinout of the component starts from 8 pins it has.Electronic comparator is recommended to mount the device using type Through Hole .As a precaution, it is recommended to set the operating temperature to -40°C~125°C to prevent malfunctions.There are 8 pins on the comparator.You can find more pin-to-pin solutions by searching TS393 .There is a quiescent current of 25μA in this comparator.The PCB or other board can be mounted using the Through Hole on it.Electronic comparator is recommended that the nominal supply current of the device be 20μA .If the current supply exceeds 20μA , the comparator might be damaged.There is sufficient power to run the device from 5V power supplies.
TS393IN Features
CMOS, Open-Drain output capability
General Purpose IC
Employing 2 elements
Operates under -40°C~125°C
Quiescent Current: 25μA
TS393IN Applications
There are a lot of STMicroelectronics TS393IN linear comparators applications.
- Consumer Medical Electronics
- RC Timers
- Automotive
- Multivibrators and High-Voltage Digital Logic Gates
- Set Top Boxes
- Mobile Communications
- Simple Analog-to-Digital Converters (ADCs)
- Metering Systems
- Notebooks and PDAs
- Limit Comparators