TS393IPT
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 7 months ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-TSSOP (0.173, 4.40mm Width) |
| Number of Pins | 8 |
| Operating Temperature | -40°C~125°C |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Type | General Purpose |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Comparator |
| Max Power Dissipation | 625mW |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Supply Voltage | 3V |
| Terminal Pitch | 0.65mm |
| Time@Peak Reflow Temperature-Max (s) | 10 |
| Base Part Number | TS393 |
| Pin Count | 8 |
| Output Type | CMOS, Open-Drain |
| Number of Elements | 2 |
| Power Supplies | 5V |
| Nominal Supply Current | 20μA |
| Power Dissipation | 625mW |
| Output Current | 20mA |
| Max Supply Current | 20μA |
| Quiescent Current | 25μA |
| Response Time | 1.5 μs |
| Common Mode Rejection Ratio | 71 dB |
| Voltage - Supply, Single/Dual (±) | 2.7V~16V ±1.35V~8V |
| Output Current per Channel | 2nA |
| Input Offset Voltage (Vos) | 5mV |
| Average Bias Current-Max (IIB) | 0.0006μA |
| Power Supply Rejection Ratio (PSRR) | 80dB |
| Max Input Current | 1pA |
| Input Bias Current | 1pA |
| Voltage - Input Offset (Max) | 5mV @ 10V |
| Current - Input Bias (Max) | 1pA @ 5V |
| CMRR, PSRR (Typ) | 71dB CMRR |
| Natural Thermal Resistance | 120 °C/W |
| Height | 1.05mm |
| Length | 3.1mm |
| Width | 4.5mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TS393IPT Overview
The product is packaged in 8-TSSOP (0.173, 4.40mm Width) for ease of transportation.Output type CMOS, Open-Drain is used for this comparator.The chip is packaged with Tape & Reel (TR) .There are8 terminals on the comparator.The electrical component in this case belongs to the Comparator family.A comparator supplied with 3V voltage can complete many demanding tasks.When it comes to types, this comparator is a typical General Purpose .There are a total of 2 elements in it.The device contains 8 pins.A Surface Mount mounting type is recommended.Electronic comparator is recommended that the operating temperature be set to -40°C~125°C to prevent malfunctions.The comparator is equipped with 8 pins.Search TS393 to find more pin-to-pin solutions.There is a quiescent current of 25μA in this comparator.Mounting on PCBs or other boards is easy with the Surface Mount .Normally, the nominal supply current should be 20μA when using the device.Current supply exceeding 20μA could cause disfunction of the compartator.5V power supplies are enough to run the device.You are allowed to input a maximum current of 1pA into the device.
TS393IPT Features
CMOS, Open-Drain output capability
General Purpose IC
Employing 2 elements
Operates under -40°C~125°C
Quiescent Current: 25μA
TS393IPT Applications
There are a lot of STMicroelectronics TS393IPT linear comparators applications.
- Wireless Base Stations
- Battery-Powered Electronics
- Notebooks and PDAs
- Hand-Held Electronics
- System control and monitoring
- Portable and Battery-Powered Systems
- RC Timers
- Threshold Detectors
- DC/DC and AC/DC power supplies
- Mobile Communications
