TS393IYDT
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 7 months ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 8 |
| Operating Temperature | -40°C~125°C |
| Packaging | Tape & Reel (TR) |
| Series | Automotive, AEC-Q100 |
| JESD-609 Code | e4 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Type | General Purpose |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Comparator |
| Packing Method | TAPE AND REEL |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Supply Voltage | 3V |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | TS393 |
| Pin Count | 8 |
| Output Type | CMOS, Open-Drain |
| Number of Elements | 2 |
| Nominal Supply Current | 20μA |
| Output Current | 20mA |
| Quiescent Current | 25μA |
| Response Time | 2.5 μs |
| Common Mode Rejection Ratio | 71 dB |
| Voltage - Supply, Single/Dual (±) | 2.7V~16V ±1.35V~8V |
| Input Offset Voltage (Vos) | 5mV |
| Average Bias Current-Max (IIB) | 0.0006μA |
| Power Supply Rejection Ratio (PSRR) | 71dB |
| Max Input Current | 1pA |
| Input Bias Current | 1pA |
| Voltage - Input Offset (Max) | 5mV @ 10V |
| Current - Input Bias (Max) | 1pA @ 5V |
| CMRR, PSRR (Typ) | 71dB CMRR |
| Height Seated (Max) | 1.75mm |
| Length | 4.9mm |
| Width | 3.9mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
TS393IYDT Overview
Electronic comparator is packaged in 8-SOIC (0.154, 3.90mm Width) for convenient transportation.This comparator is of the CMOS, Open-Drain output type.The chip is packaged with Tape & Reel (TR) .Electronic comparator is possible to find the 8 terminals of the comparator.The electrical component in this case belongs to the Comparator families.Supplied by 3V voltage, the comparator can accomplish the many demanding tasks.This is a typical comparator of type General Purpose .In total, it contains 2 elements.The pinout of the component starts from 8 pins it has.Electronic comparator is recommended that you mount the device using type Surface Mount .A temperature setting of -40°C~125°C should be used for the operating temperature in order to prevent malfunctions.The comparator has 8 pins.You can find more pin-to-pin solutions by searching TS393 .A quiescent current of 25μA is observed in this comparator.This component has a Surface Mount mount for mounting to PCBs or other boards.The nominal supply current of the device should be 20μA for normal use.The maximal current your can input into the device is 1pA .Comparator electronics is part of the Automotive, AEC-Q100 comparator series.This device is usually used in ADC circuits (packaged in TAPE AND REEL ).
TS393IYDT Features
CMOS, Open-Drain output capability
General Purpose IC
Employing 2 elements
Operates under -40°C~125°C
Quiescent Current: 25μA
TS393IYDT Applications
There are a lot of STMicroelectronics TS393IYDT linear comparators applications.
- General-Purpose Portable Devices
- High-Speed Sampling Circuits
- Zero-Crossing Detectors
- Automotive
- Appliances
- Body Control Modules
- Wireless Base Stations
- Analog front end
- Infotainment & cluster
- Window Comparators
