TS393MD
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 8 |
| Operating Temperature | -55°C~125°C |
| Packaging | Tube |
| JESD-609 Code | e4 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Type | General Purpose |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Comparator |
| Max Power Dissipation | 710mW |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Supply Voltage | 5V |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | TS393 |
| Pin Count | 8 |
| Qualification Status | Not Qualified |
| Output Type | CMOS, Open-Drain |
| Number of Elements | 2 |
| Power Supplies | 5V |
| Nominal Supply Current | 20μA |
| Power Dissipation | 710mW |
| Max Supply Current | 20μA |
| Quiescent Current | 25μA |
| Response Time | 800 ns |
| Common Mode Rejection Ratio | 71 dB |
| Voltage - Supply, Single/Dual (±) | 2.7V~16V ±1.35V~8V |
| Input Offset Voltage (Vos) | 5mV |
| Average Bias Current-Max (IIB) | 0.0006μA |
| Power Supply Rejection Ratio (PSRR) | 80dB |
| Input Bias Current | 1pA |
| Voltage - Input Offset (Max) | 5mV @ 5V |
| Current - Input Bias (Max) | 1pA @ 5V |
| CMRR, PSRR (Typ) | 71dB CMRR |
| Height Seated (Max) | 1.75mm |
| Length | 4.9mm |
| Width | 3.9mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TS393MD Overview
Electronic comparator is packaged in 8-SOIC (0.154, 3.90mm Width) for convenient transportation.The comparator has a type CMOS, Open-Drain output.We ship the part through Tube .You can find 8 terminals of the comparator.Other Comparator like the device play a important role in the industry.When supplied with 5V voltage, the comparator is capable of performing a wide range of tasks.A comparator of this type is typically of type General Purpose .The total number of elements is 2 .The board includes 8 pins.In general, mounting type Surface Mount is recommended.In order to avoid malfunctions, the operating temperature should be set to -55°C~125°C .The comparator consists of 8 pins.You can find more pin-to-pin solutions for your special requirements by searching TS393 .A quiescent current of 25μA is displayed by this comparator.The PCB or other board can be mounted using the Surface Mount on it.Electronic comparator is recommended that the nominal supply current of the device be 20μA .If the current supply exceeds 20μA , the comparator could malfunction.In order to run the device, there are only 5V power supplies required.
TS393MD Features
CMOS, Open-Drain output capability
General Purpose IC
Employing 2 elements
Operates under -55°C~125°C
Quiescent Current: 25μA
TS393MD Applications
There are a lot of STMicroelectronics TS393MD linear comparators applications.
- Wide Range VCO; MOS Clock Timers
- Mobile Communications
- Infotainment and Clusters
- Wearable Devices
- Self-diagnostics
- Analog front end
- Hand-Held Electronics
- Current and voltage sensing
- Pulse, Squarewave, and Time Delay Generators
- Threshold Detectors
