TS393MDT
| Parameters | |
|---|---|
| Input Bias Current | 1pA |
| Voltage - Input Offset (Max) | 5mV @ 5V |
| Current - Input Bias (Max) | 1pA @ 5V |
| CMRR, PSRR (Typ) | 71dB CMRR |
| Height Seated (Max) | 1.75mm |
| Length | 4.9mm |
| Width | 3.9mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 8 |
| Operating Temperature | -55°C~125°C |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Type | General Purpose |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Comparator |
| Max Power Dissipation | 710mW |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Supply Voltage | 5V |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | TS393 |
| Pin Count | 8 |
| Qualification Status | Not Qualified |
| Output Type | CMOS, Open-Drain |
| Number of Elements | 2 |
| Power Supplies | 5V |
| Nominal Supply Current | 20μA |
| Max Supply Current | 20μA |
| Quiescent Current | 25μA |
| Response Time | 800 ns |
| Common Mode Rejection Ratio | 71 dB |
| Voltage - Supply, Single/Dual (±) | 2.7V~16V ±1.35V~8V |
| Input Offset Voltage (Vos) | 5mV |
| Average Bias Current-Max (IIB) | 0.0006μA |
| Max Input Current | 1pA |
TS393MDT Overview
In order to make transportation easier, it is packaged in 8-SOIC (0.154, 3.90mm Width) .Output type of this comparator is CMOS, Open-Drain .This chip is designed with the Tape & Reel (TR) package.The comparator has a total of 8 terminals.Electronic comparator is a part of Comparator family.In the presence of a 5V voltage, the comparator is capable of accomplishing a variety of demanding tasks.Electronic comparator is possible to classify the chip as General Purpose .Currently, it consists of only 2 elements.The pinout of the component starts from 8 pins it has.Electronic comparator is recommended to mount using type Surface Mount .As a precaution, it is recommended to set the operating temperature to -55°C~125°C to prevent malfunctions.There are 8 pins on the comparator.If you require more pin-to-pin solutions, search TS393 for more options.There is 25μA current flowing in this comparator.A Surface Mount is provided for mounting it onto a PCB or another board.The nominal supply current of the device should be 20μA for normal use.Current supply exceeding 20μA could cause disfunction of the compartator.The device can be run with 5V power supplies.You can input a maximum current of 1pA into this device.
TS393MDT Features
CMOS, Open-Drain output capability
General Purpose IC
Employing 2 elements
Operates under -55°C~125°C
Quiescent Current: 25μA
TS393MDT Applications
There are a lot of STMicroelectronics TS393MDT linear comparators applications.
- Alarm and Monitoring Circuits
- Factory automation & control
- Metering Systems
- Wireless Base Stations
- Pulse, Squarewave, and Time Delay Generators
- Infotainment and Clusters
- System control and monitoring
- Hand-Held Electronics
- Appliances
- Window Comparators, Multivibrators
