TS3A24157DGSR

35ns, 25ns SPDT 600mOhm DUAL Analog Switches BREAK-BEFORE-MAKE TS3A24157 10 Pins 50nA 1.8V 10-TFSOP, 10-MSOP (0.118, 3.00mm Width)

Manufacturer: Texas Instruments
Nocochips NO: 815-TS3A24157DGSR
Package: 10-TFSOP, 10-MSOP (0.118, 3.00mm Width)
Datasheet: -
Stock: 893
Description: 35ns, 25ns SPDT 600mOhm DUAL Analog Switches BREAK-BEFORE-MAKE TS3A24157 10 Pins 50nA 1.8V 10-TFSOP, 10-MSOP (0.118, 3.00mm Width)(Kg)

Inquiry Now

Details

Tags

Parameters
Factory Lead Time	1 Week
Lifecycle Status	ACTIVE (Last Updated: 5 days ago)
Mount	Surface Mount
Mounting Type	Surface Mount
Package / Case	10-TFSOP, 10-MSOP (0.118, 3.00mm Width)
Number of Pins	10
Weight	19.986414mg
Operating Temperature	-40°C~85°C TA
Packaging	Tape & Reel (TR)
JESD-609 Code	e4
Pbfree Code	yes
Part Status	Active
Moisture Sensitivity Level (MSL)	1 (Unlimited)
Number of Terminations	10
Termination	SMD/SMT
ECCN Code	EAR99
Resistance	650mOhm
Terminal Finish	Nickel/Palladium/Gold (Ni/Pd/Au)
Subcategory	Multiplexer or Switches
Terminal Position	DUAL
Terminal Form	GULL WING
Peak Reflow Temperature (Cel)	260
Number of Functions	2
Supply Voltage	1.8V
Terminal Pitch	0.5mm
Base Part Number	TS3A24157
Pin Count	10
Number of Outputs	4
Operating Supply Voltage	3V
Number of Channels	2
Max Supply Voltage	3.6V
Min Supply Voltage	1.65V
Operating Supply Current	15nA
Max Supply Current	25nA
Turn On Delay Time	35 ns
Number of Inputs	2
Supply Type	Single
Bandwidth	50MHz
Turn-Off Delay Time	25 ns
On-State Resistance (Max)	600mOhm
Multiplexer/Demultiplexer Circuit	2:1
Off-state Isolation-Nom	73 dB
Current - Leakage (IS(off)) (Max)	50nA
Channel Capacitance (CS(off), CD(off))	50pF
On-state Resistance Match-Nom	0.15Ohm
Switch Circuit	SPDT
Switch Time (Ton, Toff) (Max)	35ns, 25ns
Charge Injection	8.75pC
Channel-to-Channel Matching (ΔRon)	50m Ω
Crosstalk	-72dB @ 1MHz
Switching	BREAK-BEFORE-MAKE
Switch-on Time-Max	80ns
Voltage - Supply, Single (V+)	1.65V~3.6V
Drain to Source Resistance	650mOhm
Signal Current-Max	0.1A
Height	1.07mm
Length	3mm
Width	3mm
Thickness	1.02mm
Radiation Hardening	No
REACH SVHC	No SVHC
RoHS Status	ROHS3 Compliant
Lead Free	Lead Free

TS3A24157DGSR Overview

The electronic component is convenient to ship overseas because it is packed in a 10-TFSOP, 10-MSOP (0.118, 3.00mm Width). The advanced packaging method Tape & Reel (TR) provides high reliability. Multiplexers like this are mounted in the Surface Mount position. Multiplexer and demultiplexer circuits have a number 2:1. Operation at a temperature around -40°C~85°C TA. Total terminations are 10. A electrical component with 2 channels is capable of high-quality output. When a voltage supply of 1.8V is used, the electronic component should be turned on and run. An injection of 10 pins is performed into the body of the electrical component. Unlike digital switches, these are based on SPDT switching circuits. Search with TS3A24157 if you are looking for analog multiplexer variants. As far as internal resistance is concerned, it has 650mOhm. The functions of 10 pins can be found in the datasheets. This switch device is a typical Multiplexer or Switches. In normalcircumstances, users should not exceed 3.6V volts for the multiplexer. A cost-effective Single supply type analogue multiplexer. It is recommended that the electrical component receives a voltage of 1.65V. This multiplexer would work with 15nA current. An analogue multiplexer drains from a single voltage supply at 1.65V~3.6V. If you put voltage higher than 25nA on the digital multiplexer, damage may occur. A voltage of 3V can be used to operate the electronic component. The electrical component supports 2 inputs. 50MHz-bandwidths can be used to transfer data between multiplexers. There is 650mOhm Drain to Source resistance on this electronic part. In this digital multiplexer, there are 4 outputs.