TS3A24159DRCR
| Parameters | |
|---|---|
| Channel Capacitance (CS(off), CD(off)) | 90pF |
| On-state Resistance Match-Nom | 0.02Ohm |
| Switch Circuit | SPDT |
| Switch Time (Ton, Toff) (Max) | 35ns, 25ns |
| Charge Injection | 9pC |
| Channel-to-Channel Matching (ΔRon) | 10m Ω |
| Crosstalk | -96dB @ 1MHz |
| Switching | BREAK-BEFORE-MAKE |
| Switch-on Time-Max | 75ns |
| Switch-off Time-Max | 35ns |
| Voltage - Supply, Single (V+) | 1.65V~3.6V |
| Signal Current-Max | 0.1A |
| Height | 1mm |
| Length | 3mm |
| Width | 3mm |
| Thickness | 900μm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 5 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 10-VFDFN Exposed Pad |
| Number of Pins | 10 |
| Weight | 26.109911mg |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 2 (1 Year) |
| Number of Terminations | 10 |
| ECCN Code | EAR99 |
| Resistance | 300mOhm |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Multiplexer or Switches |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Supply Voltage | 1.8V |
| Terminal Pitch | 0.5mm |
| Base Part Number | TS3A24159 |
| Pin Count | 10 |
| Number of Outputs | 4 |
| Power Supplies | 1.8/3V |
| Number of Channels | 2 |
| Max Supply Voltage | 3.6V |
| Min Supply Voltage | 1.65V |
| Operating Supply Current | 15nA |
| Nominal Supply Current | 15nA |
| Max Supply Current | 100nA |
| Turn On Delay Time | 40 ns |
| Number of Inputs | 2 |
| Supply Type | Single |
| Bandwidth | 23MHz |
| Turn-Off Delay Time | 30 ns |
| On-State Resistance (Max) | 300mOhm |
| Multiplexer/Demultiplexer Circuit | 2:1 |
| Off-state Isolation-Nom | 73 dB |
| Current - Leakage (IS(off)) (Max) | 10nA |
TS3A24159DRCR Overview
As the electronic part is packed in 10-VFDFN Exposed Pad, international shipping is convenient. To ensure high reliability, a new packaging method Tape & Reel (TR) is used. In Surface Mount, you'll find this switch device. In the multiplexer and demultiplexer, 2:1 represents the number of circuits. Operational temperature extended around -40°C~85°C TA. A total of 10 terminations have been recorded. This electronic part offers high-quality output due to its 2 channels. Powered by a 1.8V voltage supply, the electrical part should be switched on and run. This electronic part can be found in the 10 series. A SPDT switching circuit is used for these analog switches. Using the TS3A24159 search parameter, you can discover variants of the switch. Analog switches have 300mOhm internal resistance. You can find the functions of the 10 pins in the datasheets. Multiplexer or Switches is a typical switch device. An abnormal situation would be for the switch device to be supplied with a voltage greater than 3.6V. The digital multiplexer has a low cost Single supply. It is recommended to use 1.65V as the lowest voltage for the electrical part. The analogue multiplexer could operate on 15nA current. Using a single voltage supply, this switch device consumes 1.65V~3.6V volts. If put voltage greater than 100nA on the device, damage may be caused to the analogue multiplexer. A 2 input needs to be operated. The data can be transferred over a wide range of bandwidths, called 23MHz bandwidths. A analog switch ics with 4 outputs is included.
TS3A24159DRCR Features
2 Channels
Switch Circuit: SPDT
15nA Supply Current
Bandwidth: 23MHz
TS3A24159DRCR Applications
There are a lot of Texas Instruments TS3A24159DRCR Analog Switches & Multiplexers ICs applications.
- Fiber to the Home
- Private Branch Exchange (PBX)
- Signal routing between systems
- Low-Voltage
- Microprocessor Controlled Analog Systems
- Public switching systems
- Wireless Local Loop
- PBX interfaces
- Switching Systems
- PDH Multiplexers
