TS3A24159YZPR

35ns, 25ns SPDT 300mOhm BOTTOM Analog Switches BREAK-BEFORE-MAKE TS3A24159 10 Pins 10nA 1.8V 10-XFBGA, DSBGA

Manufacturer: Texas Instruments
Nocochips NO: 815-TS3A24159YZPR
Package: 10-XFBGA, DSBGA
Datasheet: PDF
Stock: 717
Description: 35ns, 25ns SPDT 300mOhm BOTTOM Analog Switches BREAK-BEFORE-MAKE TS3A24159 10 Pins 10nA 1.8V 10-XFBGA, DSBGA(Kg)

Details

Tags

Parameters
Factory Lead Time	1 Week
Lifecycle Status	ACTIVE (Last Updated: 3 days ago)
Mount	Surface Mount
Mounting Type	Surface Mount
Package / Case	10-XFBGA, DSBGA
Number of Pins	10
Operating Temperature	-40°C~85°C TA
Packaging	Tape & Reel (TR)
JESD-609 Code	e1
Pbfree Code	yes
Part Status	Active
Moisture Sensitivity Level (MSL)	1 (Unlimited)
Number of Terminations	10
ECCN Code	EAR99
Resistance	300mOhm
Terminal Finish	Tin/Silver/Copper (Sn/Ag/Cu)
Subcategory	Multiplexer or Switches
Terminal Position	BOTTOM
Terminal Form	BALL
Peak Reflow Temperature (Cel)	260
Number of Functions	2
Supply Voltage	1.8V
Terminal Pitch	0.5mm
Base Part Number	TS3A24159
Pin Count	10
Number of Outputs	4
Power Supplies	1.8/3V
Number of Channels	2
Max Supply Voltage	3.6V
Min Supply Voltage	1.65V
Operating Supply Current	15nA
Nominal Supply Current	15nA
Max Supply Current	100nA
Turn On Delay Time	40 ns
Number of Inputs	2
Supply Type	Single
Bandwidth	23MHz
Turn-Off Delay Time	30 ns
On-State Resistance (Max)	300mOhm
Multiplexer/Demultiplexer Circuit	2:1
Off-state Isolation-Nom	73 dB
Current - Leakage (IS(off)) (Max)	10nA
Channel Capacitance (CS(off), CD(off))	90pF
On-state Resistance Match-Nom	0.02Ohm
Switch Circuit	SPDT
Switch Time (Ton, Toff) (Max)	35ns, 25ns
Charge Injection	9pC
Channel-to-Channel Matching (ΔRon)	10m Ω
Crosstalk	-96dB @ 1MHz
Switching	BREAK-BEFORE-MAKE
Switch-on Time-Max	75ns
Switch-off Time-Max	35ns
Voltage - Supply, Single (V+)	1.65V~3.6V
Signal Current-Max	0.1A
Height	500μm
Length	2.25mm
Width	1.25mm
Thickness	310μm
Radiation Hardening	No
REACH SVHC	No SVHC
RoHS Status	ROHS3 Compliant
Lead Free	Lead Free

TS3A24159YZPR Overview

Due to its 10-XFBGA, DSBGA packaging, the electronic part is convenient for international shipping. Advanced packaging method Tape & Reel (TR) is used to provide high reliability. There is an analog multiplexer mounted in position Surface Mount. The ratio between the number of multiplexer and demultiplexer circuits is 2:1. The operating temperature is extended to around -40°C~85°C TA. Totally, there are 10 terminations. By its 2 channels, the electronic component provides high-quality output. An 1.8V voltage supply should allow the electrical part to be turned on and run. The electronic part body is injected with 10 pins. Circuits based on SPDT switching are used to construct these analog switch ics. TS3A24159 can be used to search for analog multiplexer variants. There is 300mOhm internal resistance in this digital multiplexer. For details about the functions of 10 pins, please refer to the datasheets. This switch device is a typical Multiplexer or Switches. In normalcircumstances, users should not exceed 3.6V volts for the multiplexer. Digital switch that provides Single power at a cost-effective price. 1.65V should be the lowest voltage fed to the electronic component. In order to operate this switch device, it would need a current of 15nA. This analog switch requires a voltage of 1.65V~3.6V to drain from a single voltage supply. The switch multiplexer may be damaged if it is exposed to voltage greater than 100nA. In order to operate the 2 inputs, there are several steps to follow. It is possible to transfer data over a 23MHz-bandwidth. In this digital multiplexer, there are 4 outputs.