TS3A27518EIPWRQ1
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 1 week ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 24-TSSOP (0.173, 4.40mm Width) |
| Number of Pins | 24 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Series | Automotive, AEC-Q100 |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 24 |
| ECCN Code | EAR99 |
| Resistance | 6.2Ohm |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| HTS Code | 8542.39.00.01 |
| Subcategory | Multiplexer or Switches |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Base Part Number | TS3A27518 |
| Pin Count | 24 |
| Number of Outputs | 12 |
| Power Supplies | 1.8/3.3V |
| Number of Channels | 2 |
| Max Supply Voltage | 3.6V |
| Min Supply Voltage | 1.65V |
| Operating Supply Current | 40nA |
| Turn On Delay Time | 68 ns |
| Logic Function | Demultiplexer, Multiplexer |
| Number of Inputs | 6 |
| Supply Type | Single |
| Bandwidth | 240MHz |
| Turn-Off Delay Time | 70 ns |
| On-State Resistance (Max) | 6.2Ohm |
| Multiplexer/Demultiplexer Circuit | 2:1 |
| Off-state Isolation-Nom | 60 dB |
| Current - Leakage (IS(off)) (Max) | 1μA |
| Channel Capacitance (CS(off), CD(off)) | 13pF 8.5pF |
| On-state Resistance Match-Nom | 5.5Ohm |
| Switch Circuit | SPDT |
| Switch Time (Ton, Toff) (Max) | 59ns, 60.6ns |
| Charge Injection | 0.81pC |
| Channel-to-Channel Matching (ΔRon) | 300m Ω |
| Crosstalk | -62dB @ 10MHz |
| Switching | BREAK-BEFORE-MAKE |
| Switch-off Time-Max | 35.2ns |
| Voltage - Supply, Single (V+) | 1.65V~3.6V |
| Normal Position | NO |
| Signal Current-Max | 0.05A |
| Height | 1.2mm |
| Length | 7.8mm |
| Width | 4.4mm |
| Thickness | 1mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TS3A27518EIPWRQ1 Overview
Due to its 24-TSSOP (0.173, 4.40mm Width) packaging, the electronic part is convenient for international shipping. High reliability is ensured by the advanced packaging method Tape & Reel (TR). The multiplexer is located in Surface Mount. Multiplexers and demultiplexers have a ratio of 2:1. Extended operating temperature around -40°C~85°C TA. Total terminations are 24. The electronic part provides high-quality output because it has 2 channels. It is safe to turn on and run the electronic component with a 3.3V voltage supply. It is part of the design of the 24 series that this electronic component is included. A SPDT switching circuit is used for these analog switches. Use TS3A27518 to search for variants of the digital switches. It has an internal resistance of 6.2Ohm. Datasheets for functions of 24 pins are available. The analogue multiplexer in this example is a typical Multiplexer or Switches. Users should never supply a voltage higher than 3.6V to a switch device. The analog switch ic is of the Single supply type and is cost-effective. 1.65V is the lowest voltage that should be fed to the electronic electronic part. It would be sufficient to run this analogue multiplexer with 40nA current. Using a single voltage supply, this switch device consumes 1.65V~3.6V volts. The 6 inputs need to be operated in order to work. There are 240MHz bandwidths for data transfer. In this digital multiplexer, there are 12 outputs. This is one of the Automotive, AEC-Q100 series.
TS3A27518EIPWRQ1 Features
2 Channels
Switch Circuit: SPDT
40nA Supply Current
Bandwidth: 240MHz
TS3A27518EIPWRQ1 Applications
There are a lot of Texas Instruments TS3A27518EIPWRQ1 Analog Switches & Multiplexers ICs applications.
- Multi-Line E1 Interface Cards
- SONET/SDH ADM
- FTTH
- Microprocessor Controlled Analog Systems
- Channelized and Unchannelized DS3 applications
- Communication systems
- Precision test equipment
- Automotive applications
- Access Concentrators
- Cellular phones
