TS3A27518EIRTWRQ1
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 4 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 24-WFQFN Exposed Pad |
| Number of Pins | 24 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Series | Automotive, AEC-Q100 |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 24 |
| Resistance | 6.2Ohm |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| HTS Code | 8542.39.00.01 |
| Subcategory | Multiplexer or Switches |
| Terminal Position | QUAD |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 3 |
| Supply Voltage | 1.8V |
| Terminal Pitch | 0.5mm |
| Base Part Number | TS3A27518 |
| Output | SEPARATE OUTPUT |
| Power Supplies | 1.8/3.3V |
| Number of Channels | 2 |
| Number of Circuits | 6 |
| Max Supply Voltage | 3.6V |
| Min Supply Voltage | 1.65V |
| Operating Supply Current | 40nA |
| Turn On Delay Time | 68 ns |
| Logic Function | Demultiplexer, Multiplexer |
| Supply Type | Single |
| Bandwidth | 240MHz |
| Supply Current-Max (Isup) | 0.0012mA |
| Turn-Off Delay Time | 70 ns |
| On-State Resistance (Max) | 6.2Ohm |
| Multiplexer/Demultiplexer Circuit | 2:1 |
| Off-state Isolation-Nom | 60 dB |
| Current - Leakage (IS(off)) (Max) | 1μA |
| Channel Capacitance (CS(off), CD(off)) | 13pF 8.5pF |
| On-state Resistance Match-Nom | 1Ohm |
| Switch Circuit | SPDT |
| Switch Time (Ton, Toff) (Max) | 59ns, 60.6ns |
| Charge Injection | 0.81pC |
| Channel-to-Channel Matching (ΔRon) | 300m Ω |
| Crosstalk | -62dB @ 10MHz |
| Switching | BREAK-BEFORE-MAKE |
| Switch-off Time-Max | 35.2ns |
| Voltage - Supply, Single (V+) | 1.65V~3.6V |
| Normal Position | NO |
| Signal Current-Max | 0.05A |
| Height | 800μm |
| Length | 4mm |
| Width | 4mm |
| Thickness | 750μm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TS3A27518EIRTWRQ1 Overview
Presented in 24-WFQFN Exposed Pad, this electrical component is convenient for overseas shipping. The advanced packaging method Tape & Reel (TR) provides high reliability. In Surface Mount, this analog switch is mounted. 2:1 is the ratio of multiplexer to demultiplexer circuits. Operation at a temperature around -40°C~85°C TA. Totally, there are 24 terminations. By its 2 channels, the electronic component provides high-quality output. It is safe to turn on and run the electronic component with a 1.8V voltage supply. Unlike digital switches, these are based on SPDT switching circuits. There are 6 circuits in this multiplexer. Try searching with TS3A27518 to find analog multiplexer variants. An switch multiplexer with 6.2Ohm internal resistance has a value of 6.2Ohm. To find out what the 24 pins do, please refer to the datasheets. In this analog multiplexer, the value is Multiplexer or Switches. An abnormal situation would be for the switch device to be supplied with a voltage greater than 3.6V. Analogue multiplexers of the Single supply type that are cost-effective. The lowest voltage fed to the electronic component should be 1.65V. This multiplexer would work with 40nA current. A voltage of 1.65V~3.6V is required for this switch device, which drains from a single voltage source. The analog switch ic utilizes SEPARATE OUTPUT outputs in total. The transfer of data can be performed over 240MHz bandwidths. Automotive, AEC-Q100 is a series number.
TS3A27518EIRTWRQ1 Features
2 Channels
Switch Circuit: SPDT
40nA Supply Current
Bandwidth: 240MHz
TS3A27518EIRTWRQ1 Applications
There are a lot of Texas Instruments TS3A27518EIRTWRQ1 Analog Switches & Multiplexers ICs applications.
- Cross Connects
- Industrial
- Audio and video routing
- Industrial and process control systems
- MP3 players
- Access Concentrators
- Cable Modem
- Medical Instrumentation
- SDH
- Power routing
