TS3A27518EZQSR

59ns, 60.6ns SPDT 6.2Ohm BOTTOM Analog Switches BREAK-BEFORE-MAKE TS3A27518 24 Pins 1μA 1.8V 24-VFBGA

Manufacturer: Texas Instruments
Nocochips NO: 815-TS3A27518EZQSR
Package: 24-VFBGA
Datasheet: PDF
Stock: 968
Description: 59ns, 60.6ns SPDT 6.2Ohm BOTTOM Analog Switches BREAK-BEFORE-MAKE TS3A27518 24 Pins 1μA 1.8V 24-VFBGA(Kg)

Details

Tags

Parameters
Lifecycle Status	LIFEBUY (Last Updated: 3 days ago)
Contact Plating	Copper, Silver, Tin
Mount	Surface Mount
Mounting Type	Surface Mount
Package / Case	24-VFBGA
Number of Pins	24
Operating Temperature	-40°C~85°C TA
Packaging	Tape & Reel (TR)
JESD-609 Code	e1
Pbfree Code	yes
Part Status	Obsolete
Moisture Sensitivity Level (MSL)	1 (Unlimited)
Number of Terminations	24
ECCN Code	EAR99
Resistance	6.2Ohm
Terminal Finish	Tin/Silver/Copper (Sn/Ag/Cu)
HTS Code	8542.39.00.01
Subcategory	Multiplexer or Switches
Terminal Position	BOTTOM
Terminal Form	BALL
Peak Reflow Temperature (Cel)	260
Number of Functions	1
Supply Voltage	1.8V
Terminal Pitch	0.5mm
Base Part Number	TS3A27518
Pin Count	24
Number of Outputs	12
Operating Supply Voltage	3V
Number of Channels	1
Max Supply Voltage	3.6V
Min Supply Voltage	1.65V
Operating Supply Current	40nA
Turn On Delay Time	59 ns
Logic Function	Demultiplexer, Multiplexer
Number of Inputs	6
Supply Type	Single
Bandwidth	240MHz
Supply Current-Max (Isup)	0.005mA
Turn-Off Delay Time	60.6 ns
On-State Resistance (Max)	6.2Ohm
High Level Output Current	50mA
Low Level Output Current	50mA
Multiplexer/Demultiplexer Circuit	2:1
Off-state Isolation-Nom	60 dB
Current - Leakage (IS(off)) (Max)	1μA
Channel Capacitance (CS(off), CD(off))	13pF 8.5pF
On-state Resistance Match-Nom	0.3Ohm
Switch Circuit	SPDT
Switch Time (Ton, Toff) (Max)	59ns, 60.6ns
Charge Injection	0.81pC
Channel-to-Channel Matching (ΔRon)	300m Ω
Crosstalk	-62dB @ 10MHz
Switching	BREAK-BEFORE-MAKE
Switch-off Time-Max	31.2ns
Voltage - Supply, Single (V+)	1.65V~3.6V
Normal Position	NO
Signal Current-Max	0.05A
Height	1mm
Length	3mm
Width	3mm
Thickness	750μm
Radiation Hardening	No
RoHS Status	ROHS3 Compliant
Lead Free	Lead Free

TS3A27518EZQSR Overview

The electronic part can be shipped overseas conveniently because it is packaged in 24-VFBGA. High reliability is ensured by the advanced packaging method Tape & Reel (TR). It is mounted in the position Surface Mount. 2:1 is the ratio of multiplexer to demultiplexer circuits. Increasing operating temperature to around -40°C~85°C TA. The total number of terminations is 24. By its 1 channels, the electronic component provides high-quality output. With a 1.8V voltage supply, the electrical component should be turned on and run. It is part of the design of the 24 series that this electronic component is included. On the other hand, analog switches can be constructed using SPDT switching circuits. Try searching for the analog switch ic with TS3A27518 if you are looking for variants. It has an internal resistance of 6.2Ohm. Datasheets for functions of 24 pins are available. Theswitch device is a typical Multiplexer or Switches. Multiplexers should not be powered above 3.6V in normal situations. Single supply type digital switch with a low cost. In order for the electronic part to function properly, the lowest voltage should be 1.65V. The switch device would be able to operate with 40nA current. Using a single voltage supply, this switch device consumes 1.65V~3.6V volts. There is a voltage range of 3V operating voltages for the electrical part. Among the inputs that can be operated are the 6 inputs. The transfer of data can be performed over 240MHz bandwidths. In this digital multiplexer, there are 12 outputs.