TS3A44159PWR

23ns, 32ns SPDT 450mOhm DUAL Analog Switches BREAK-BEFORE-MAKE TS3A44159 16 Pins 20nA 1.8V 16-TSSOP (0.173, 4.40mm Width)

Manufacturer: Texas Instruments
Nocochips NO: 815-TS3A44159PWR
Package: 16-TSSOP (0.173, 4.40mm Width)
Datasheet: -
Stock: 416
Description: 23ns, 32ns SPDT 450mOhm DUAL Analog Switches BREAK-BEFORE-MAKE TS3A44159 16 Pins 20nA 1.8V 16-TSSOP (0.173, 4.40mm Width)(Kg)

Inquiry Now

Details

Tags

Parameters
Factory Lead Time	1 Week
Lifecycle Status	ACTIVE (Last Updated: 3 days ago)
Mount	Surface Mount
Mounting Type	Surface Mount
Package / Case	16-TSSOP (0.173, 4.40mm Width)
Number of Pins	16
Weight	61.887009mg
Operating Temperature	-40°C~85°C TA
Packaging	Tape & Reel (TR)
JESD-609 Code	e4
Pbfree Code	yes
Part Status	Active
Moisture Sensitivity Level (MSL)	1 (Unlimited)
Number of Terminations	16
ECCN Code	EAR99
Resistance	450mOhm
Terminal Finish	Nickel/Palladium/Gold (Ni/Pd/Au)
Subcategory	Multiplexer or Switches
Technology	CMOS
Terminal Position	DUAL
Terminal Form	GULL WING
Peak Reflow Temperature (Cel)	260
Number of Functions	2
Supply Voltage	1.8V
Frequency	35MHz
Base Part Number	TS3A44159
Output	SEPARATE OUTPUT
Pin Count	16
Operating Supply Voltage	3V
Number of Channels	4
Number of Circuits	4
Max Supply Voltage	4.3V
Min Supply Voltage	1.65V
Operating Supply Current	15nA
Max Supply Current	400nA
Turn On Delay Time	23 ns
Number of Inputs	2
Supply Type	Single
Bandwidth	35MHz
Turn-Off Delay Time	32 ns
On-State Resistance (Max)	450mOhm
Multiplexer/Demultiplexer Circuit	2:1
Off-state Isolation-Nom	71 dB
Current - Leakage (IS(off)) (Max)	20nA
Channel Capacitance (CS(off), CD(off))	50pF
On-state Resistance Match-Nom	0.05Ohm
Switch Circuit	SPDT
Switch Time (Ton, Toff) (Max)	23ns, 32ns
Charge Injection	139pC
Channel-to-Channel Matching (ΔRon)	50m Ω
Crosstalk	-73dB @ 100kHz
Switching	BREAK-BEFORE-MAKE
Switch-on Time-Max	75ns
Switch-off Time-Max	50ns
Voltage - Supply, Single (V+)	1.65V~4.3V
Drain to Source Resistance	300mOhm
Height	1.2mm
Length	5mm
Width	4.4mm
Thickness	1mm
Radiation Hardening	No
REACH SVHC	No SVHC
RoHS Status	ROHS3 Compliant
Lead Free	Lead Free

TS3A44159PWR Overview

Packed in 16-TSSOP (0.173, 4.40mm Width), the electronic component is convenient for shipping overseas. This high-reliability packaging method uses advanced packaging methods Tape & Reel (TR). In Surface Mount, this analog switch is mounted. There is 2:1 ratio between the number of multiplexers and demultiplexers. An extended operating temperature of -40°C~85°C TA degrees Celsius. 16 terminations have been made so far. A electrical component with 4 channels is capable of high-quality output. If the voltage supply is 1.8V volts, the electrical component should be turned on and run. An injection of 16 pins is performed into the body of the electrical component. Circuits based on SPDT switching are used to construct these analog switch ics. There are 4 circuits in this switch device. TS3A44159 can be used to search for analog multiplexer variants. Analog switches have 450mOhm internal resistance. You can find the functions of the 16 pins in the datasheets. It is a typical Multiplexer or Switches analog multiplexer. Users should never supply a voltage higher than 4.3V to a switch device. The analog switch ic is of the Single supply type and is cost-effective. The lowest voltage fed to the electronic component should be 1.65V. This multiplexer would work with 15nA current. This analog switch requires a voltage of 1.65V~4.3V to drain from a single voltage supply. Put voltage above 400nA on the multiplexer to cause damage. There are SEPARATE OUTPUT outputs on this analog switch ic. It can operate from 3V operating voltages. Operating 2 inputs is required. A 35MHz-bandwidth can be used for data transfer. It has a Drain to Source resistance of 300mOhm ohms.