TS3A44159RGTR

23ns, 32ns SPDT 450mOhm QUAD Analog Switches BREAK-BEFORE-MAKE TS3A44159 16 Pins 20nA 1.8V 16-VFQFN Exposed Pad

Manufacturer: Texas Instruments
Nocochips NO: 815-TS3A44159RGTR
Package: 16-VFQFN Exposed Pad
Datasheet: -
Stock: 992
Description: 23ns, 32ns SPDT 450mOhm QUAD Analog Switches BREAK-BEFORE-MAKE TS3A44159 16 Pins 20nA 1.8V 16-VFQFN Exposed Pad(Kg)

Details

Tags

Parameters
Length	3mm
Width	3mm
Thickness	900μm
Radiation Hardening	No
REACH SVHC	No SVHC
RoHS Status	ROHS3 Compliant
Lead Free	Lead Free
Factory Lead Time	1 Week
Lifecycle Status	ACTIVE (Last Updated: 5 days ago)
Contact Plating	Gold
Mount	Surface Mount
Mounting Type	Surface Mount
Package / Case	16-VFQFN Exposed Pad
Number of Pins	16
Weight	24.097095mg
Operating Temperature	-40°C~85°C TA
Packaging	Tape & Reel (TR)
JESD-609 Code	e4
Pbfree Code	yes
Part Status	Active
Moisture Sensitivity Level (MSL)	1 (Unlimited)
Number of Terminations	16
ECCN Code	EAR99
Resistance	450mOhm
Subcategory	Multiplexer or Switches
Technology	CMOS
Terminal Position	QUAD
Peak Reflow Temperature (Cel)	260
Number of Functions	2
Supply Voltage	1.8V
Terminal Pitch	0.5mm
Base Part Number	TS3A44159
Pin Count	16
Number of Outputs	8
Operating Supply Voltage	3V
Polarity	Non-Inverting
Number of Channels	4
Max Supply Voltage	4.3V
Min Supply Voltage	1.65V
Operating Supply Current	15nA
Max Supply Current	400nA
Turn On Delay Time	23 ns
Number of Inputs	4
Supply Type	Single
Bandwidth	35MHz
Turn-Off Delay Time	32 ns
On-State Resistance (Max)	450mOhm
High Level Output Current	200mA
Low Level Output Current	200mA
Multiplexer/Demultiplexer Circuit	2:1
Off-state Isolation-Nom	71 dB
Current - Leakage (IS(off)) (Max)	20nA
Channel Capacitance (CS(off), CD(off))	50pF
On-state Resistance Match-Nom	0.05Ohm
Switch Circuit	SPDT
Switch Time (Ton, Toff) (Max)	23ns, 32ns
Charge Injection	139pC
Channel-to-Channel Matching (ΔRon)	50m Ω
Crosstalk	-73dB @ 100kHz
Switching	BREAK-BEFORE-MAKE
Switch-on Time-Max	75ns
Switch-off Time-Max	50ns
Voltage - Supply, Single (V+)	1.65V~4.3V
Drain to Source Resistance	450mOhm
Height	1mm

TS3A44159RGTR Overview

Presented in 16-VFQFN Exposed Pad, this electrical component is convenient for overseas shipping. To ensure high reliability, a new packaging method Tape & Reel (TR) is used. In Surface Mount, you'll find this switch device. 2:1 is the number of circuits in the multiplexer and demultiplexer. Operating temperature around -40°C~85°C TA extended. There are 16 terminations totally. A electrical component with 4 channels is capable of high-quality output. Powered by a 1.8V voltage supply, the electrical part should be switched on and run. A total of 16 pins are injected into the body of the electronic part. A SPDT switching circuit is used to build these analog multiplexers. Try searching with TS3A44159 to find analog multiplexer variants. This digital multiplexer has 450mOhm internal resistance. Datasheets for 16 pin functions are available upon request. It is a typical Multiplexer or Switches analog multiplexer. It is normally recommended that users do not supply the multiplexer with voltages higher than 4.3V. Single supply type digital switch with a low cost. The lowest voltage the electronic part should receive is 1.65V. The analogue multiplexer could operate on 15nA current. Analogue multiplexers require a 1.65V~4.3V voltage to drain from a single voltage supply. Putting voltage greater than 400nA on the multiplexer may cause damage. There is a voltage range of 3V operating voltages for the electrical part. Operating the 4 inputs requires 4 inputs. A 35MHz-bandwidth can be used for data transfer. There is 450mOhm resistance between the Drain and Source on this part. A analog switch ics with 8 outputs is included.