TS3A44159RSVR

23ns, 32ns SPDT 450mOhm QUAD Analog Switches BREAK-BEFORE-MAKE TS3A44159 16 Pins 20nA 1.8V 16-UFQFN

Manufacturer: Texas Instruments
Nocochips NO: 815-TS3A44159RSVR
Package: 16-UFQFN
Datasheet: PDF
Stock: 520
Description: 23ns, 32ns SPDT 450mOhm QUAD Analog Switches BREAK-BEFORE-MAKE TS3A44159 16 Pins 20nA 1.8V 16-UFQFN(Kg)

Details

Tags

Parameters
Mount	Surface Mount
Mounting Type	Surface Mount
Package / Case	16-UFQFN
Number of Pins	16
Weight	40.908362mg
Operating Temperature	-40°C~85°C TA
Packaging	Tape & Reel (TR)
JESD-609 Code	e4
Pbfree Code	yes
Part Status	Active
Moisture Sensitivity Level (MSL)	1 (Unlimited)
Number of Terminations	16
ECCN Code	EAR99
Resistance	450mOhm
Subcategory	Multiplexer or Switches
Technology	CMOS
Terminal Position	QUAD
Peak Reflow Temperature (Cel)	260
Number of Functions	2
Supply Voltage	1.8V
Base Part Number	TS3A44159
Pin Count	16
Number of Outputs	8
Operating Supply Voltage	3V
Polarity	Non-Inverting
Number of Channels	4
Max Supply Voltage	4.3V
Min Supply Voltage	1.65V
Operating Supply Current	15nA
Nominal Supply Current	150nA
Max Supply Current	400nA
Turn On Delay Time	25 ns
Number of Inputs	4
Supply Type	Single
Bandwidth	35MHz
Turn-Off Delay Time	35 ns
On-State Resistance (Max)	450mOhm
High Level Output Current	200mA
Low Level Output Current	200mA
Multiplexer/Demultiplexer Circuit	2:1
Off-state Isolation-Nom	71 dB
Current - Leakage (IS(off)) (Max)	20nA
Channel Capacitance (CS(off), CD(off))	50pF
On-state Resistance Match-Nom	0.05Ohm
Switch Circuit	SPDT
Switch Time (Ton, Toff) (Max)	23ns, 32ns
Charge Injection	139pC
Channel-to-Channel Matching (ΔRon)	50m Ω
Crosstalk	-73dB @ 100kHz
Switching	BREAK-BEFORE-MAKE
Switch-on Time-Max	75ns
Switch-off Time-Max	50ns
Voltage - Supply, Single (V+)	1.65V~4.3V
Height	550μm
Length	2.6mm
Width	1.8mm
Thickness	500μm
Radiation Hardening	No
REACH SVHC	No SVHC
RoHS Status	ROHS3 Compliant
Lead Free	Lead Free
Factory Lead Time	1 Week
Lifecycle Status	ACTIVE (Last Updated: 6 days ago)
Contact Plating	Gold

TS3A44159RSVR Overview

The electronic part can be shipped overseas conveniently because it is packaged in 16-UFQFN. To ensure high reliability, a new packaging method Tape & Reel (TR) is used. It is mounted in the position Surface Mount. Multiplexers and demultiplexers have a ratio of 2:1. Operation at a temperature around -40°C~85°C TA. The total number of terminations is 16. A electrical component with 4 channels is capable of high-quality output. It is safe to turn on and run the electronic component with a 1.8V voltage supply. This electronic part can be found in the 16 series. On the other hand, analog switches can be constructed using SPDT switching circuits. Using the TS3A44159 search parameter, you can discover variants of the switch. This digital multiplexer has 450mOhm internal resistance. Datasheets for functions of 16 pins are available. The analogue multiplexer in this example is a typical Multiplexer or Switches. A voltage higher than 4.3V should not normally be supplied to the switches. Digital switch that provides Single power at a cost-effective price. There should be 1.65V voltage fed to the electrical part below 1.65V. This digital switch can be operated with a current of 15nA. Using only a single voltage supply, this analog switch requires 1.65V~4.3V voltage. If you put voltage higher than 400nA on the digital multiplexer, damage may occur. The electrical part can be operated at 3V voltage levels. The electrical component supports 4 inputs. A 35MHz-bandwidth can be used for data transfer. A analog switch ics with 8 outputs is included.