TS3A4741DGKR

14ns, 9ns SPST - NO 900mOhm DUAL Analog Switches BREAK-BEFORE-MAKE TS3A4741 8 Pins 2nA 1.8V 8-TSSOP, 8-MSOP (0.118, 3.00mm Width)

Manufacturer: Texas Instruments
Nocochips NO: 815-TS3A4741DGKR
Package: 8-TSSOP, 8-MSOP (0.118, 3.00mm Width)
Datasheet: -
Stock: 493
Description: 14ns, 9ns SPST - NO 900mOhm DUAL Analog Switches BREAK-BEFORE-MAKE TS3A4741 8 Pins 2nA 1.8V 8-TSSOP, 8-MSOP (0.118, 3.00mm Width)(Kg)

Inquiry Now

Details

Tags

Parameters
Length	3mm
Width	3mm
Thickness	970μm
Radiation Hardening	No
REACH SVHC	No SVHC
RoHS Status	ROHS3 Compliant
Lead Free	Lead Free
Factory Lead Time	1 Week
Lifecycle Status	ACTIVE (Last Updated: 5 days ago)
Mount	Surface Mount
Mounting Type	Surface Mount
Package / Case	8-TSSOP, 8-MSOP (0.118, 3.00mm Width)
Number of Pins	8
Weight	18.99418mg
Operating Temperature	-40°C~85°C TA
Packaging	Tape & Reel (TR)
JESD-609 Code	e4
Pbfree Code	yes
Part Status	Active
Moisture Sensitivity Level (MSL)	1 (Unlimited)
Number of Terminations	8
ECCN Code	EAR99
Resistance	900mOhm
Terminal Finish	Nickel/Palladium/Gold (Ni/Pd/Au)
Subcategory	Multiplexer or Switches
Technology	CMOS
Terminal Position	DUAL
Terminal Form	GULL WING
Peak Reflow Temperature (Cel)	260
Number of Functions	2
Supply Voltage	1.8V
Terminal Pitch	0.65mm
Base Part Number	TS3A4741
Output	SEPARATE OUTPUT
Pin Count	8
Number of Channels	2
Max Supply Voltage	3.6V
Min Supply Voltage	1.65V
Nominal Supply Current	75nA
Max Supply Current	750nA
Throw Configuration	SPST
Turn On Delay Time	15 ns
Number of Inputs	2
Supply Type	Single
Bandwidth	125MHz
Turn-Off Delay Time	10 ns
On-State Resistance (Max)	900mOhm
Multiplexer/Demultiplexer Circuit	1:1
Off-state Isolation-Nom	61 dB
Current - Leakage (IS(off)) (Max)	2nA
Channel Capacitance (CS(off), CD(off))	23pF 20pF
On-state Resistance Match-Nom	0.09Ohm
Switch Circuit	SPST - NO
Switch Time (Ton, Toff) (Max)	14ns, 9ns
Charge Injection	3pC
Channel-to-Channel Matching (ΔRon)	30m Ω
Crosstalk	-95dB @ 1MHz
Switching	BREAK-BEFORE-MAKE
Voltage - Supply, Single (V+)	1.6V~3.6V
Normal Position	NO
Height	1.07mm

TS3A4741DGKR Overview

Shipping overseas is convenient due to the electrical component's packing in 8-TSSOP, 8-MSOP (0.118, 3.00mm Width). Advanced packaging method Tape & Reel (TR) is used to provide high reliability. There is an analog multiplexer mounted in position Surface Mount. Multiplexers and demultiplexers have the same number of circuits 1:1. Operating temperature extended to -40°C~85°C TA. A total of 8 terminations have been recorded. The electronic part delivers high-quality output through its 2 channels. A 1.8V voltage supply should turn on and run the electronic component. This electrical component is included in the 8 series of products. A SPST - NO switching circuit is used to build these analog multiplexers. Use TS3A4741 to search for variants of the digital switches. In this multiplexer, the internal resistance is 900mOhm. Please refer to the datasheets for 8 pins functions. Multiplexer or Switches is a typical switch device. In normalcircumstances, users should not exceed 3.6V volts for the multiplexer. The digital multiplexer has a low cost Single supply. The lowest voltage fed to the electronic component should be 1.65V. A voltage of 1.6V~3.6V is required for this switch device, which drains from a single voltage source. A voltage higher than 750nA may cause damage to the switch multiplexer. A total of SEPARATE OUTPUT outputs are available on this analog switch ic. It is possible to operate 2 inputs. 125MHz-bandwidths can be used to transfer data between multiplexers.