Parameters |
Factory Lead Time |
1 Week |
Lifecycle Status |
ACTIVE (Last Updated: 5 days ago) |
Mount |
Surface Mount |
Mounting Type |
Surface Mount |
Package / Case |
8-TSSOP, 8-MSOP (0.118, 3.00mm Width) |
Number of Pins |
8 |
Weight |
18.99418mg |
Operating Temperature |
-40°C~85°C TA |
Packaging |
Tape & Reel (TR) |
JESD-609 Code |
e4 |
Pbfree Code |
yes |
Part Status |
Active |
Moisture Sensitivity Level (MSL) |
1 (Unlimited) |
Number of Terminations |
8 |
ECCN Code |
EAR99 |
Resistance |
900mOhm |
Terminal Finish |
Nickel/Palladium/Gold (Ni/Pd/Au) |
Subcategory |
Multiplexer or Switches |
Technology |
CMOS |
Terminal Position |
DUAL |
Terminal Form |
GULL WING |
Peak Reflow Temperature (Cel) |
260 |
Number of Functions |
2 |
Supply Voltage |
1.8V |
Terminal Pitch |
0.65mm |
Base Part Number |
TS3A4742 |
Output |
SEPARATE OUTPUT |
Pin Count |
8 |
Number of Channels |
2 |
Max Supply Voltage |
3.6V |
Min Supply Voltage |
1.65V |
Nominal Supply Current |
75nA |
Max Supply Current |
750nA |
Throw Configuration |
SPST |
Turn On Delay Time |
15 ns |
Number of Inputs |
2 |
Supply Type |
Single |
Bandwidth |
125MHz |
Turn-Off Delay Time |
10 ns |
On-State Resistance (Max) |
900mOhm |
Multiplexer/Demultiplexer Circuit |
1:1 |
Off-state Isolation-Nom |
61 dB |
Current - Leakage (IS(off)) (Max) |
2nA |
Channel Capacitance (CS(off), CD(off)) |
23pF 20pF |
On-state Resistance Match-Nom |
0.09Ohm |
Switch Circuit |
SPST - NC |
Switch Time (Ton, Toff) (Max) |
14ns, 9ns |
Charge Injection |
3pC |
Channel-to-Channel Matching (ΔRon) |
30m Ω |
Crosstalk |
-95dB @ 1MHz |
Switching |
BREAK-BEFORE-MAKE |
Voltage - Supply, Single (V+) |
1.6V~3.6V |
Normal Position |
NO |
Height |
1.07mm |
Length |
3mm |
Width |
3mm |
Thickness |
970μm |
Radiation Hardening |
No |
RoHS Status |
ROHS3 Compliant |
Lead Free |
Lead Free |
TS3A4742DGKR Overview
The electronic component is convenient to ship overseas because it is packed in a 8-TSSOP, 8-MSOP (0.118, 3.00mm Width). This packaging method provides high reliability because it uses advanced packaging techniques. In Surface Mount, you'll find this switch device. In the multiplexer and demultiplexer, 1:1 represents the number of circuits. An extended operating temperature of -40°C~85°C TA degrees Celsius. In total, there are 8 terminations. By its 2 channels, the electronic component provides high-quality output. An 1.8V voltage supply should allow the electrical part to be turned on and run. This electronic part can be found in the 8 series. These analog multiplexers are built based on SPST - NC switching circuits. Search with TS3A4742 if you are looking for analog multiplexer variants. In this multiplexer, the internal resistance is 900mOhm. To find out what the functions of 8 pins are, please refer to their datasheets. The analog multiplexer shown here is a typical Multiplexer or Switches. Users should never supply a voltage higher than 3.6V to a switch device. A analog switch ic that has a cost-effective Single supply type. It is recommended that the electrical component receives a voltage of 1.65V. Draining from a single voltage supply, this analog switch requires a voltage of 1.6V~3.6V. When the digital multiplexer is charged above 750nA, damage can occur. The digital multiplexer has SEPARATE OUTPUT outputs that can be used. There are 2 inputs to be operated. A 125MHz-bandwidth can be used for data transfer.
TS3A4742DGKR Features
2 Channels
Switch Circuit: SPST - NC
Bandwidth: 125MHz
TS3A4742DGKR Applications
There are a lot of Texas Instruments TS3A4742DGKR Analog Switches & Multiplexers ICs applications.
- E1 Network Equipment
- Automatic test equipment
- New designs requiring multiplexer functions
- PBXs
- Avionics
- Communication systems
- Avionics test equipment
- DSLAMs
- Medical
- Precision instrumentation