Parameters |
Termination |
SMD/SMT |
ECCN Code |
EAR99 |
Resistance |
900mOhm |
Subcategory |
Multiplexer or Switches |
Technology |
CMOS |
Terminal Position |
DUAL |
Terminal Form |
GULL WING |
Peak Reflow Temperature (Cel) |
260 |
Number of Functions |
4 |
Supply Voltage |
1.8V |
Base Part Number |
TS3A4751 |
Pin Count |
14 |
Operating Supply Voltage |
3V |
Polarity |
Non-Inverting |
Number of Channels |
4 |
Max Supply Voltage |
3.6V |
Min Supply Voltage |
1.6V |
Max Supply Current |
75nA |
Throw Configuration |
SPST |
Turn On Delay Time |
14 ns |
Number of Inputs |
4 |
Supply Type |
Single |
Bandwidth |
125MHz |
Turn-Off Delay Time |
9 ns |
On-State Resistance (Max) |
900mOhm |
High Level Output Current |
100mA |
Low Level Output Current |
100mA |
Multiplexer/Demultiplexer Circuit |
1:1 |
Off-state Isolation-Nom |
61 dB |
Current - Leakage (IS(off)) (Max) |
2nA |
Channel Capacitance (CS(off), CD(off)) |
23pF 20pF |
On-state Resistance Match-Nom |
0.09Ohm |
Switch Circuit |
SPST - NO |
Switch Time (Ton, Toff) (Max) |
14ns, 9ns |
Charge Injection |
3pC |
Channel-to-Channel Matching (ΔRon) |
30m Ω |
Crosstalk |
-95dB @ 1MHz |
Switching |
BREAK-BEFORE-MAKE |
Switch-on Time-Max |
20ns |
Switch-off Time-Max |
12ns |
Voltage - Supply, Single (V+) |
1.6V~3.6V |
Drain to Source Resistance |
900mOhm |
Normal Position |
NO |
Height |
1.2mm |
Length |
5mm |
Width |
4.4mm |
Thickness |
1mm |
Radiation Hardening |
No |
REACH SVHC |
No SVHC |
RoHS Status |
ROHS3 Compliant |
Lead Free |
Lead Free |
Factory Lead Time |
1 Week |
Lifecycle Status |
ACTIVE (Last Updated: 5 days ago) |
Contact Plating |
Gold |
Mount |
Surface Mount |
Mounting Type |
Surface Mount |
Package / Case |
14-TSSOP (0.173, 4.40mm Width) |
Number of Pins |
14 |
Weight |
57.209338mg |
Operating Temperature |
-40°C~85°C TA |
Packaging |
Tape & Reel (TR) |
JESD-609 Code |
e4 |
Pbfree Code |
yes |
Part Status |
Active |
Moisture Sensitivity Level (MSL) |
1 (Unlimited) |
Number of Terminations |
14 |
TS3A4751PWR Overview
As the electronic part is packed in 14-TSSOP (0.173, 4.40mm Width), international shipping is convenient. The advanced packaging method Tape & Reel (TR) provides high reliability. The multiplexer is located in Surface Mount. Multiplexers and demultiplexers have a ratio of 1:1. Increasing operating temperature to around -40°C~85°C TA. Totally, there are 14 terminations. This electronic part offers high-quality output due to its 4 channels. With a 1.8V voltage supply, the electrical component should be turned on and run. There are 14 pins injected into the electronic part body. Circuits based on SPST - NO switching are used to construct these analog switch ics. Use TS3A4751 to search for variants of the digital switches. An switch multiplexer with 900mOhm internal resistance has a value of 900mOhm. To find out what the functions of 14 pins are, please refer to their datasheets. The analog multiplexer shown here is a typical Multiplexer or Switches. Users shouldn't supply more than 3.6V voltage to the switch device. Digital switch that provides Single power at a cost-effective price. The lowest voltage fed to the electronic component should be 1.6V. An analogue multiplexer drains from a single voltage supply at 1.6V~3.6V. Putting voltage greater than 75nA on the multiplexer may cause damage. There is a voltage range of 3V operating voltages for the electrical part. Among the inputs that can be operated are the 4 inputs. There are various bandwidths available for data transfer. It has a Drain to Source resistance of 900mOhm ohms.
TS3A4751PWR Features
4 Channels
Switch Circuit: SPST - NO
Bandwidth: 125MHz
Drain-to-Source resistance: 900mOhm
TS3A4751PWR Applications
There are a lot of Texas Instruments TS3A4751PWR Analog Switches & Multiplexers ICs applications.
- Communications systems
- Battery-powered systems
- MP3 players
- Channelized and Unchannelized DS3 applications
- Signal routing between systems
- Digital access cross connects
- Microwave transmission systems
- Medical systems
- 65 V DACs
- Microprocessor Controlled Analog Systems