TS3A4751RGYR
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 4 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 14-VFQFN Exposed Pad |
| Number of Pins | 14 |
| Weight | 32.205058mg |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 2 (1 Year) |
| Number of Terminations | 14 |
| ECCN Code | EAR99 |
| Resistance | 900mOhm |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Multiplexer or Switches |
| Technology | CMOS |
| Terminal Position | QUAD |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 4 |
| Supply Voltage | 1.8V |
| Terminal Pitch | 0.5mm |
| Base Part Number | TS3A4751 |
| Output | SEPARATE OUTPUT |
| Pin Count | 14 |
| Power Supplies | 1.8/3V |
| Number of Channels | 4 |
| Max Supply Voltage | 3.6V |
| Min Supply Voltage | 1.6V |
| Nominal Supply Current | 75nA |
| Max Supply Current | 750nA |
| Throw Configuration | SPST |
| Turn On Delay Time | 15 ns |
| Number of Inputs | 4 |
| Supply Type | Single |
| Bandwidth | 125MHz |
| Turn-Off Delay Time | 9 ns |
| On-State Resistance (Max) | 900mOhm |
| Multiplexer/Demultiplexer Circuit | 1:1 |
| Off-state Isolation-Nom | 61 dB |
| Current - Leakage (IS(off)) (Max) | 2nA |
| Channel Capacitance (CS(off), CD(off)) | 23pF 20pF |
| On-state Resistance Match-Nom | 0.09Ohm |
| Switch Circuit | SPST - NO |
| Switch Time (Ton, Toff) (Max) | 14ns, 9ns |
| Charge Injection | 3pC |
| Channel-to-Channel Matching (ΔRon) | 30m Ω |
| Crosstalk | -95dB @ 1MHz |
| Switching | BREAK-BEFORE-MAKE |
| Switch-on Time-Max | 20ns |
| Switch-off Time-Max | 12ns |
| Voltage - Supply, Single (V+) | 1.6V~3.6V |
| Normal Position | NO |
| Height | 1mm |
| Length | 3.5mm |
| Width | 3.5mm |
| Thickness | 900μm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TS3A4751RGYR Overview
Presented in 14-VFQFN Exposed Pad, this electrical component is convenient for overseas shipping. To ensure high reliability, a new packaging method Tape & Reel (TR) is used. Surface Mount is where this multiplexer is located. Multiplexers and demultiplexers have a number of circuits 1:1. Extended operating temperature around -40°C~85°C TA. In total, 14 terminations have occurred. By its 4 channels, the electronic component provides high-quality output. With a 1.8V voltage supply, the electrical component should be turned on and run. A total of 14 pins are injected into the body of the electronic part. SPST - NO switching circuits are used in these analog switch ics. Try searching for TS3A4751 variants of the analog switch ic. It has an internal resistance of 900mOhm. To find out what the functions of 14 pins are, please refer to their datasheets. There is Multiplexer or Switches analog multiplexer like this in the world. It is generally not recommended to supply a voltage higher than 3.6V to the switch device in normal circumstances. Digital switch that provides Single power at a cost-effective price. 1.6V is the lowest voltage the electrical component should receive. Using a single voltage supply, this switch device consumes 1.6V~3.6V volts. The switch multiplexer may be damaged if it is exposed to voltage greater than 750nA. SEPARATE OUTPUT outputs are utilized by this digital multiplexer. In order to operate the 4 inputs, there are several steps to follow. There are 125MHz bandwidths for data transfer.
TS3A4751RGYR Features
4 Channels
Switch Circuit: SPST - NO
Bandwidth: 125MHz
TS3A4751RGYR Applications
There are a lot of Texas Instruments TS3A4751RGYR Analog Switches & Multiplexers ICs applications.
- Data switching
- Microwave transmission systems
- 65 V DACs
- Voice over IP/DSL – Integrated Access Devices, Smart
- PDH Multiplexers
- Multi-Line E1 Interface Cards
- Medical systems
- Low-Voltage
- Communications systems
- High speed data transmission line cards
