TS3A5017DBQR

9.5ns, 3.5ns SP4T 12Ohm DUAL Analog Switches BREAK-BEFORE-MAKE TS3A5017 16 Pins 100nA 2.5V 16-SSOP (0.154, 3.90mm Width)

Manufacturer: Texas Instruments
Nocochips NO: 815-TS3A5017DBQR
Package: 16-SSOP (0.154, 3.90mm Width)
Datasheet: -
Stock: 280
Description: 9.5ns, 3.5ns SP4T 12Ohm DUAL Analog Switches BREAK-BEFORE-MAKE TS3A5017 16 Pins 100nA 2.5V 16-SSOP (0.154, 3.90mm Width)(Kg)

Inquiry Now

Details

Tags

Parameters
Factory Lead Time	1 Week
Lifecycle Status	ACTIVE (Last Updated: 3 days ago)
Mount	Surface Mount
Mounting Type	Surface Mount
Package / Case	16-SSOP (0.154, 3.90mm Width)
Number of Pins	16
Weight	74.502547mg
Operating Temperature	-40°C~85°C TA
Packaging	Tape & Reel (TR)
JESD-609 Code	e4
Pbfree Code	yes
Part Status	Active
Moisture Sensitivity Level (MSL)	2 (1 Year)
Number of Terminations	16
ECCN Code	EAR99
Resistance	12Ohm
Terminal Finish	Nickel/Palladium/Gold (Ni/Pd/Au)
Subcategory	Multiplexer or Switches
Terminal Position	DUAL
Terminal Form	GULL WING
Peak Reflow Temperature (Cel)	260
Number of Functions	2
Supply Voltage	2.5V
Base Part Number	TS3A5017
Pin Count	16
Number of Outputs	8
Number of Channels	4
Number of Circuits	2
Max Supply Voltage	3.6V
Min Supply Voltage	2.3V
Operating Supply Current	2.5μA
Nominal Supply Current	2.5μA
Max Supply Current	7μA
Throw Configuration	4PST
Propagation Delay	9.5 ns
Turn On Delay Time	9.5 ns
Supply Type	Single
Bandwidth	165MHz
Turn-Off Delay Time	4.5 ns
On-State Resistance (Max)	12Ohm
Multiplexer/Demultiplexer Circuit	4:1
Off-state Isolation-Nom	48 dB
Current - Leakage (IS(off)) (Max)	100nA
Channel Capacitance (CS(off), CD(off))	4.5pF 19pF
On-state Resistance Match-Nom	1Ohm
Switch Circuit	SP4T
Switch Time (Ton, Toff) (Max)	9.5ns, 3.5ns
Charge Injection	5pC
Channel-to-Channel Matching (ΔRon)	1 Ω
Crosstalk	-49dB @ 1MHz
Switching	BREAK-BEFORE-MAKE
Switch-on Time-Max	10ns
Switch-off Time-Max	6ns
Voltage - Supply, Single (V+)	2.3V~3.6V
Normal Position	NC
Signal Current-Max	0.1A
Height	1.75mm
Length	4.9mm
Width	3.9mm
Thickness	1.5mm
Radiation Hardening	No
RoHS Status	ROHS3 Compliant
Lead Free	Lead Free

TS3A5017DBQR Overview

Due to its 16-SSOP (0.154, 3.90mm Width) packaging, the electronic part is convenient for international shipping. High reliability is provided by advanced packaging method Tape & Reel (TR). Multiplexers like this are mounted in the Surface Mount position. 4:1 is the ratio between multiplexers and demultiplexers. Extended operating temperature around -40°C~85°C TA. Total terminations are 16. This electronic part offers high-quality output due to its 4 channels. An 2.5V voltage supply should allow the electrical part to be turned on and run. As part of its design, the 16 series is equipped with this electronic component. The analog switch ics are built using SP4T switching circuits. There are 2 circuits in this switch device. Search with TS3A5017 if you are looking for analog multiplexer variants. There is 12Ohm internal resistance in this digital multiplexer. To find out what the 16 pins do, please refer to the datasheets. The analogue multiplexer in this example is a typical Multiplexer or Switches. A voltage higher than 3.6V should not normally be supplied to the switches. Digital switch that provides Single power at a cost-effective price. It is recommended to use 2.3V as the lowest voltage for the electrical part. 2.5μA current would be enough for this multiplexer to operate. Draining from a single voltage supply, this analog switch requires a voltage of 2.3V~3.6V. Putting voltage greater than 7μA on the multiplexer may cause damage. There are 165MHz bandwidths for data transfer. The analogue multiplexer has 8 outputs.