TS3A5017DGVR

9.5ns, 3.5ns SP4T 12Ohm DUAL Analog Switches BREAK-BEFORE-MAKE TS3A5017 16 Pins 100nA 2.5V 16-TFSOP (0.173, 4.40mm Width)

Manufacturer: Texas Instruments
Nocochips NO: 815-TS3A5017DGVR
Package: 16-TFSOP (0.173, 4.40mm Width)
Datasheet: -
Stock: 660
Description: 9.5ns, 3.5ns SP4T 12Ohm DUAL Analog Switches BREAK-BEFORE-MAKE TS3A5017 16 Pins 100nA 2.5V 16-TFSOP (0.173, 4.40mm Width)(Kg)

Inquiry Now

Details

Tags

Parameters
Factory Lead Time	1 Week
Lifecycle Status	ACTIVE (Last Updated: 3 days ago)
Mount	Surface Mount
Mounting Type	Surface Mount
Package / Case	16-TFSOP (0.173, 4.40mm Width)
Number of Pins	16
Weight	41.900595mg
Operating Temperature	-40°C~85°C TA
Packaging	Tape & Reel (TR)
JESD-609 Code	e4
Pbfree Code	yes
Part Status	Active
Moisture Sensitivity Level (MSL)	1 (Unlimited)
Number of Terminations	16
ECCN Code	EAR99
Resistance	12Ohm
Terminal Finish	Nickel/Palladium/Gold (Ni/Pd/Au)
Subcategory	Multiplexer or Switches
Terminal Position	DUAL
Terminal Form	GULL WING
Peak Reflow Temperature (Cel)	260
Number of Functions	2
Supply Voltage	2.5V
Base Part Number	TS3A5017
Pin Count	16
Number of Outputs	8
Number of Channels	4
Number of Circuits	2
Max Supply Voltage	3.6V
Min Supply Voltage	2.3V
Operating Supply Current	2.5μA
Nominal Supply Current	2.5μA
Max Supply Current	7μA
Throw Configuration	4PST
Propagation Delay	9.5 ns
Turn On Delay Time	9.5 ns
Supply Type	Single
Bandwidth	165MHz
Turn-Off Delay Time	4.5 ns
On-State Resistance (Max)	12Ohm
Multiplexer/Demultiplexer Circuit	4:1
Off-state Isolation-Nom	48 dB
Current - Leakage (IS(off)) (Max)	100nA
Channel Capacitance (CS(off), CD(off))	4.5pF 19pF
On-state Resistance Match-Nom	1Ohm
Switch Circuit	SP4T
Switch Time (Ton, Toff) (Max)	9.5ns, 3.5ns
Charge Injection	5pC
Channel-to-Channel Matching (ΔRon)	1 Ω
Crosstalk	-49dB @ 1MHz
Switching	BREAK-BEFORE-MAKE
Switch-on Time-Max	10ns
Switch-off Time-Max	6ns
Voltage - Supply, Single (V+)	2.3V~3.6V
Normal Position	NC
Signal Current-Max	0.1A
Height	1.2mm
Length	3.6mm
Width	4.4mm
Thickness	1.05mm
Radiation Hardening	No
RoHS Status	ROHS3 Compliant
Lead Free	Lead Free

TS3A5017DGVR Overview

Due to its 16-TFSOP (0.173, 4.40mm Width) packaging, the electronic part is convenient for international shipping. A high level of reliability can be achieved through the use of an advanced packaging method Tape & Reel (TR). There is an analog multiplexer mounted in position Surface Mount. In the multiplexer and demultiplexer, 4:1 represents the number of circuits. Operation at a temperature around -40°C~85°C TA. Total terminations are 16. A 4 channel electronic part produces high-quality output. If the voltage supply is 2.5V volts, the electrical component should be turned on and run. As part of the design of the 16 series, this electronic part has been incorporated into the system. Multiplexers built on a SP4T switching circuit are built. It consists of 2 circuits. Look for analog switch ic variants by searching with TS3A5017. Internally, this switch multiplexer has a resistance of 12Ohm. Datasheets for functions of 16 pins are available. The analog multiplexer shown here is a typical Multiplexer or Switches. An abnormal situation would be for the switch device to be supplied with a voltage greater than 3.6V. Single supply type digital switch with a low cost. A low voltage of 2.3V should be applied to the electronic component. This multiplexer would work with 2.5μA current. Draining from a single voltage supply, this analog switch requires a voltage of 2.3V~3.6V. When the digital multiplexer is charged above 7μA, damage can occur. The transfer of data can be performed over 165MHz bandwidths. The analogue multiplexer has 8 outputs.