TS3A5017DR

9.5ns, 3.5ns SP4T 12Ohm DUAL Analog Switches BREAK-BEFORE-MAKE TS3A5017 16 Pins 100nA 2.5V 16-SOIC (0.154, 3.90mm Width)

Manufacturer: Texas Instruments
Nocochips NO: 815-TS3A5017DR
Package: 16-SOIC (0.154, 3.90mm Width)
Datasheet: -
Stock: 144
Description: 9.5ns, 3.5ns SP4T 12Ohm DUAL Analog Switches BREAK-BEFORE-MAKE TS3A5017 16 Pins 100nA 2.5V 16-SOIC (0.154, 3.90mm Width)(Kg)

Inquiry Now

Details

Tags

Parameters
ECCN Code	EAR99
Resistance	12Ohm
Terminal Finish	Nickel/Palladium/Gold (Ni/Pd/Au)
Subcategory	Multiplexer or Switches
Terminal Position	DUAL
Terminal Form	GULL WING
Peak Reflow Temperature (Cel)	260
Number of Functions	2
Supply Voltage	2.5V
Base Part Number	TS3A5017
Pin Count	16
Number of Outputs	8
Number of Channels	4
Number of Circuits	2
Max Supply Voltage	3.6V
Min Supply Voltage	2.3V
Operating Supply Current	2.5μA
Nominal Supply Current	2.5μA
Max Supply Current	7μA
Throw Configuration	4PST
Propagation Delay	9.5 ns
Turn On Delay Time	9.5 ns
Supply Type	Single
Bandwidth	165MHz
Turn-Off Delay Time	4.5 ns
On-State Resistance (Max)	12Ohm
Multiplexer/Demultiplexer Circuit	4:1
Off-state Isolation-Nom	48 dB
Current - Leakage (IS(off)) (Max)	100nA
Channel Capacitance (CS(off), CD(off))	4.5pF 19pF
On-state Resistance Match-Nom	1Ohm
Switch Circuit	SP4T
Switch Time (Ton, Toff) (Max)	9.5ns, 3.5ns
Charge Injection	5pC
Channel-to-Channel Matching (ΔRon)	1 Ω
Crosstalk	-49dB @ 1MHz
Switching	BREAK-BEFORE-MAKE
Switch-on Time-Max	10ns
Switch-off Time-Max	6ns
Voltage - Supply, Single (V+)	2.3V~3.6V
Drain to Source Resistance	12Ohm
Normal Position	NC
Signal Current-Max	0.1A
Height	1.75mm
Length	9.9mm
Width	3.91mm
Thickness	1.58mm
Radiation Hardening	No
REACH SVHC	No SVHC
RoHS Status	ROHS3 Compliant
Lead Free	Lead Free
Factory Lead Time	1 Week
Lifecycle Status	ACTIVE (Last Updated: 3 days ago)
Mount	Surface Mount
Mounting Type	Surface Mount
Package / Case	16-SOIC (0.154, 3.90mm Width)
Number of Pins	16
Weight	141.690917mg
Operating Temperature	-40°C~85°C TA
Packaging	Tape & Reel (TR)
JESD-609 Code	e4
Pbfree Code	yes
Part Status	Active
Moisture Sensitivity Level (MSL)	1 (Unlimited)
Number of Terminations	16

TS3A5017DR Overview

The electronic component is convenient to ship overseas because it is packed in a 16-SOIC (0.154, 3.90mm Width). This packaging method provides high reliability because it uses advanced packaging techniques. There is an analog multiplexer mounted in position Surface Mount. 4:1 is the ratio of multiplexer to demultiplexer circuits. Operation at a temperature around -40°C~85°C TA. Total terminations are 16. As a result of its 4 channels, this electronic component provides high-quality output. With a 2.5V voltage supply, the electrical component should be turned on and run. As part of its design, the 16 series is equipped with this electronic component. These analog multiplexers are built based on SP4T switching circuits. There are 2 circuits in this multiplexer. Look for analog switch ic variants by searching with TS3A5017. Internally, this switch multiplexer has a resistance of 12Ohm. The functions of 16 pins can be found in the datasheets. There is a standard Multiplexer or Switches analogue multiplexer here. In normalcircumstances, users should not exceed 3.6V volts for the multiplexer. Analog switch ics with Single supply type are cost-effective. It is recommended to use 2.3V as the lowest voltage for the electrical part. For this multiplexer to operate, 2.5μA current would be sufficient. Using only a single voltage supply, this analog switch requires 2.3V~3.6V voltage. It may damage the digital multiplexer if the voltage is higher than 7μA. This switch operates within the bandwidth of 165MHz. There is 12Ohm Drain to Source resistance on this electronic part. A analog switch ics with 8 outputs is included.